TX Backflow Prevention Assembly Test and Maintenance Report - City of Corpus Chisti 2015-2025 free printable template

CITY OF CORPUS CHRISTI Submits TO: CITY OF CORPUS CHRISTI, DEVELOPMENT SERVICES DEPT.PLUMBING DIVISION (Regulatory Agency), BACKFLOW PREVENTION PROGRAM 2406 Leopard St. PO Box 9277 CORPUS CHRISTI,

How to fill out TX Backflow Prevention Assembly Test and

How to fill out TX Backflow Prevention Assembly Test and Maintenance

1. Gather necessary documents and materials, including the TX Backflow Prevention Assembly Test and Maintenance form.
2. Ensure you have the correct backflow prevention assembly model and serial number.
3. Identify the location of the backflow prevention assembly and ensure it is accessible.
4. Shut off the water supply to the assembly to ensure a safe testing environment.
5. Connect the test kit to the assembly according to the manufacturer's instructions.
6. Conduct the required tests for the backflow prevention assembly, noting any readings and conditions.
7. Fill out the form accurately by detailing the results of your tests and any maintenance performed.
8. Sign and date the form to certify the test completion.
9. Submit the completed form to the local water authority as required.

Who needs TX Backflow Prevention Assembly Test and Maintenance?

1. Homeowners with irrigation systems that use potable water.
2. Commercial properties with any water supply connected to a public system.
3. Municipalities that provide water to customers.
4. Plumbing professionals and certified testers authorized to perform backflow testing.
5. Property managers responsible for maintaining compliance with local regulations.

People Also Ask about

What is the best form of backflow prevention?

An air gap is the most effective type of backflow prevention. This method utilizes a physical air space between the potable and non-potable systems. The most common example of this would be a faucet and a sink. This may be a backflow prevention method used to fill a water supply tank.

When would use of a backflow preventer be required?

To reduce the risk of contamination, a backflow preventer can be fitted. A backflow preventer is also important when potentially toxic chemicals are used, for instance for commercial/industrial descaling of boilers, or when chemical bleaches are used for residential power washing.

Who can a backflow prevention in Texas?

A Texas State Board of Plumbing Examiners (TSBPE) licensed Plumbing Inspector. A TSBPE-licensed plumber with a Water Supply Protection Specialist endorsement.

Can I use a check valve instead of a backflow preventer?

check valves. And we clear up a misconception that's often inquired about in online forums: while check valves have other important applications, they cannot be considered a safe substitute for backflow preventers when it comes to protecting the purity of drinking water.

Is a backflow preventer required by code in Texas?

Texas Administrative Code. (-b-) Backflow preventers. Backflow preventers (vacuum breakers) shall be installed on hose bibs, laboratory sinks, janitor sinks, bedpan-flushing attachments, and on all other fixtures to which hoses or tubing can be attached.

Which way does water go in a backflow preventer?

How Does a Backflow Preventer Work? Water should only ever flow in one direction: into your building or home. On occasion, due to pressure changes in the pipes, water can actually flow backward and into the main water supply line.

Where is the backflow valve on my sprinkler system?

1:39 6:30 Drain Your Sprinkler Backflow Valve - YouTube YouTube Start of suggested clip End of suggested clip And then we're gonna drain this line which is the feed line for the sprinkler first. And then we'llMoreAnd then we're gonna drain this line which is the feed line for the sprinkler first. And then we'll drain this line.

How much does backflow testing cost in Dallas Texas?

1-3 devices tested $150.00 each. 4-6 devices tested $145.00 each. 7-10 devices tested $135.00 each. 11-15 devices tested $125.00 each.

Does Texas require backflow testing?

Because backflow-prevention assemblies are mechanical assemblies that can fail, the TCEQ requires testing of all backflow-prevention assemblies at installation by a TCEQ-licensed tester. Backflow-prevention assemblies installed to protect against any health hazard must be tested annually.

For pdfFiller’s FAQs

How can I send TX Backflow Prevention Assembly Test and for eSignature?

Once you are ready to share your TX Backflow Prevention Assembly Test and, you can easily send it to others and get the eSigned document back just as quickly. Share your PDF by email, fax, text message, or USPS mail, or notarize it online. You can do all of this without ever leaving your account.

How do I edit TX Backflow Prevention Assembly Test and straight from my smartphone?

The best way to make changes to documents on a mobile device is to use pdfFiller's apps for iOS and Android. You may get them from the Apple Store and Google Play. Learn more about the apps here. To start editing TX Backflow Prevention Assembly Test and, you need to install and log in to the app.

How do I complete TX Backflow Prevention Assembly Test and on an Android device?

On an Android device, use the pdfFiller mobile app to finish your TX Backflow Prevention Assembly Test and. The program allows you to execute all necessary document management operations, such as adding, editing, and removing text, signing, annotating, and more. You only need a smartphone and an internet connection.

What is TX Backflow Prevention Assembly Test and Maintenance?

TX Backflow Prevention Assembly Test and Maintenance refers to the procedures and inspections required to ensure that backflow prevention devices are functioning properly to prevent contaminated water from flowing back into the potable water supply.

Who is required to file TX Backflow Prevention Assembly Test and Maintenance?

Individuals or entities that have backflow prevention assemblies installed on their properties, such as commercial and industrial establishments, are required to file TX Backflow Prevention Assembly Test and Maintenance reports.

How to fill out TX Backflow Prevention Assembly Test and Maintenance?

To fill out the TX Backflow Prevention Assembly Test and Maintenance form, you need to provide details such as the location of the assembly, the test results, date of testing, the tester's name and certification number, and any repairs or maintenance performed.

What is the purpose of TX Backflow Prevention Assembly Test and Maintenance?

The purpose of TX Backflow Prevention Assembly Test and Maintenance is to ensure that backflow prevention devices are operating effectively, thus safeguarding the public water supply from contamination due to backflow.

What information must be reported on TX Backflow Prevention Assembly Test and Maintenance?

Required information includes the identification of the backflow prevention assembly, test results, date of the test, the tester's certification details, and any corrective actions taken during maintenance.