Get the free Control of Hazardous Energy Program (Lockout/Tagout) - blm

This document provides safety guidelines for Bureau of Land Management (BLM) employees on the proper procedures for controlling hazardous energy during the maintenance and servicing of machinery and

How to fill out control of hazardous energy

How to fill out Control of Hazardous Energy Program (Lockout/Tagout)

1. Identify all energy sources for the equipment to be serviced or maintained.
2. Develop a control procedure for each energy source, detailing how to lock out or tag out each energy source.
3. Notify affected employees that a lockout/tagout procedure will be implemented.
4. Shut down the equipment following the machine's specific operating procedures.
5. Isolate the equipment from its energy source using lockout/tagout devices.
6. Apply lockout devices on energy-isolating switches and tagout devices to indicate the status of the lockout.
7. Ensure that all stored energy (e.g., capacitors, springs, etc.) is also released, drained, or otherwise controlled.
8. Verify that the equipment is properly locked out before beginning work by attempting to operate the controls.

Who needs Control of Hazardous Energy Program (Lockout/Tagout)?

1. Employees who operate or maintain machinery or equipment that has hazardous energy.
2. Safety personnel responsible for establishing and enforcing lockout/tagout procedures.
3. Management or supervisors overseeing operations where hazardous energy control is necessary.
4. Contractors or vendors who may perform work on energized equipment.

People Also Ask about

What are the 7 steps to lockout tagout?

How LOTO Works. #1: Notify Employees. #2: Identify Energy Sources. #3: Shut Down Equipment. #4: Deactivate Energy Isolating Devices. #5: Apply Applicable LOTO Devices. #6: Dissipate Stored Energy. #7: Verify Energy Isolation.

What are the 7 types of energy sources lockout?

Hazardous energy is defined: "any electrical, mechanical, hydraulic, pneumatic, chemical, nuclear, thermal, gravitational, or other energy that can harm personnel" (CSA Z460-20 "Control of Hazardous Energy - Lockout and Other Methods").

What is the purpose of a lockout tagout program?

Lockout/tagout establishes the maximum performance requirements for the control of such hazardous energy. Lockout devices must be substantial enough to prevent removal without the use of excessive force or unusual techniques, such as with the use of bolt cutters or other metal cutting tools.

What is a hazardous energy control program OSHA 30?

What is the intent of the energy control program? To ensure that before any employee services equipment where the potential exists for unexpected energization or start-up of equipment or the release of stored energy, the machine or equipment is isolated from the energy source and rendered inoperative.

What is the primary purpose of lockout tagout procedures Quizlet?

What is Lockout Tagout? Lockout tagout is a protection system against unintentional exposure to hazardous energy from equipment and machinery. A lockout device, such as a padlock, secures the energy isolating device while a tagout device (i.e. a tag) warns employees not to use the equipment.

What is the purpose of the lockout system?

Ultimately, the primary purpose of LOTO is to protect workers from hazardous energy sources, including electrical, mechanical, hydraulic, pneumatic, chemical, thermal or other energy sources.

What is the primary purpose of a lockout tagout program?

The purpose of a lockout/tag out program is to control hazardous energy. A lockout program should: Identify the types of: Hazardous energy in the workplace.

For pdfFiller’s FAQs

What is Control of Hazardous Energy Program (Lockout/Tagout)?

The Control of Hazardous Energy Program, commonly known as Lockout/Tagout (LOTO), is a safety protocol designed to ensure that machines are properly shut off and not able to be started up again before maintenance or servicing work is completed. It involves placing a lock or tag on energy-isolating devices to prevent the release of hazardous energy.

Who is required to file Control of Hazardous Energy Program (Lockout/Tagout)?

Employers who have employees working with potentially hazardous machinery or energy sources are required to implement and file a Control of Hazardous Energy Program. This includes any organization where workers may be exposed to the unintended release of hazardous energy during servicing and maintenance activities.

How to fill out Control of Hazardous Energy Program (Lockout/Tagout)?

To fill out the Control of Hazardous Energy Program, employers should document the specific procedures for Lockout/Tagout, including identification of energy sources, methods for energy isolation, employees involved, and steps for verification. A checklist or form may be used to ensure that all necessary steps are followed and recorded.

What is the purpose of Control of Hazardous Energy Program (Lockout/Tagout)?

The purpose of the Control of Hazardous Energy Program is to protect workers from the unexpected energization or startup of machines and equipment, or the release of stored energy. This program aims to minimize the risk of accidents and injuries caused by hazardous energy during maintenance and servicing operations.

What information must be reported on Control of Hazardous Energy Program (Lockout/Tagout)?

The Control of Hazardous Energy Program should report information including the types of energy sources, specific machinery and equipment covered, procedures for lockout/tagout, individual responsibilities, and training records. This ensures all personnel are aware of the risks and procedures associated with hazardous energy.