Get the free Prescribed Fire Plan Template - blm

A standardized template for the development of a prescribed fire plan, including approval checklists and complexity analysis for fire management.

How to fill out prescribed fire plan template

How to fill out Prescribed Fire Plan Template

1. Begin with the basic information section, including location, date, and contact information.
2. Outline the objectives of the prescribed fire, such as fuel reduction or habitat improvement.
3. Describe the site's conditions, including vegetation type and topography.
4. Detail the weather parameters for conducting the burn, noting ideal conditions.
5. Identify any sensitive areas or resources nearby that need protection.
6. Develop a burn prescription specifying fire behavior and desired outcomes.
7. Outline the personnel needed for the burn, including roles and responsibilities.
8. Include safety measures and contingency plans for emergencies.
9. Review and obtain necessary permits and approvals from relevant authorities.
10. Finalize the plan, ensuring all stakeholders have reviewed and agreed.

Who needs Prescribed Fire Plan Template?

1. Land managers responsible for forest and grassland management.
2. Wildlife agencies aiming to enhance habitats for specific species.
3. Fire departments involved in controlled burns.
4. Environmental organizations focused on ecosystem restoration.
5. Private landowners interested in improving land health and reducing wildfire risk.

People Also Ask about

How to write a prescribed fire burn plan?

Burn Plan Instructions Information. Provide basic information about the unit and landowner/manger conducting the burn. Description of Area to be Burned. Vegetation Present. Directions from Nearest Town. Notification. Management Needed Prior to Burn. Firebreak Types and Location Around the Burn Unit. Fuel Conditions.

What is the PMS 484 burn plan?

The PMS 484 describes what is minimally acceptable for prescribed fire planning and implementation. Agencies may choose to provide more restrictive standards and policy direction but must adhere to these minimums.

What are the conditions for a prescribed fire?

Prescribed Fire Conditions at a Glance Air Temperature: Under 85 degrees. Relative Humidity: 30 to 50% Fine Fuel Moisture: 8 to 15% Mixing Height: Above 1,650 feet (above 2,220 near sensitive public areas)

What is the 60 40 rule for prescribed burns?

If you're new to prescribed burns or have limited experience, use the 60:40 Rule. The 60:40 rule says you should burn with an air temperature of less than 60°F, a relative humidity greater than 40%, and a wind speed of 5-15 mph measured at six feet above the ground's surface.

What is the best humidity for prescribed burning?

The Clean Air Act has established 500 meters (1700 feet) as a minimum for mixing height for permitting prescribed burning.

What is the 60 40 rule for prescribed fire?

The 60:40 rule states you burn with a temperature <60F, a relative humidity (RH) >40 percent and a wind speed of 5 to 15 mph measured at six feet above the surface of the ground. Rule 2. Rule of halves. This rule is used in the field to predict changes in relative humidity and correspond- ing fire behavior.

What is the burn plan for a fire?

The burn plan details what, where and when you are burning as well as the mitigations that are in place to help prevent fire escapes. A burn plan template is available from Fire and Emergency. Weather is an important factor to consider when planning your burn.

For pdfFiller’s FAQs

What is Prescribed Fire Plan Template?

A Prescribed Fire Plan Template is a structured document that outlines the objectives, procedures, and considerations for conducting prescribed burns in a controlled manner to manage land and natural resources.

Who is required to file Prescribed Fire Plan Template?

Landowners, land managers, and organizations intending to conduct prescribed burns are typically required to file a Prescribed Fire Plan Template, often as part of regulatory compliance.

How to fill out Prescribed Fire Plan Template?

To fill out the Prescribed Fire Plan Template, individuals must gather necessary information regarding the burn area, goals, weather conditions, fuel types, and safety measures, and then complete each section of the template accurately.

What is the purpose of Prescribed Fire Plan Template?

The purpose of the Prescribed Fire Plan Template is to promote safe and effective prescribed burns by ensuring that all critical factors are considered and documented, thereby reducing risks to people and the environment.

What information must be reported on Prescribed Fire Plan Template?

The information that must be reported on the Prescribed Fire Plan Template includes burn objectives, site description, fire behavior predictions, weather conditions, equipment needed, personnel involved, and emergency contacts.