Get the free Percolation Test Data

Percolation Test Data New York State Department of Health Bureau of Water Supply Protection (see instructions on reverse side) Development Site: (T/V/C): Date: County: Tests Conducted By: Weather

How to fill out percolation test data

How to fill out percolation test data:

1. Start by obtaining the necessary tools and equipment for conducting a percolation test, such as a soil auger or hand shovel.
2. Select the location for the test, which is typically near the area where a septic system will be installed. Make sure the spot represents the actual soil conditions of the site.
3. Begin digging a hole at least 6 to 12 inches in diameter and 18 to 36 inches deep, ensuring that the sides are straight and vertical. This hole is called a soil test pit.
4. Take a sample of the soil from the first 6 inches of the hole and place it in a container. Repeat this process for each 6-inch interval until reaching the bottom of the hole.
5. Record the depth and corresponding soil sample for each interval on a percolation test form. It is important to be thorough and accurate in filling out this information.
6. Conduct a percolation test by pouring a specific volume of water into the hole and measuring the time it takes for the water to infiltrate into the soil.
7. Note the percolation rate, which is the amount of time it takes for the water to drop a certain distance in the hole (e.g., 1 inch in 30 minutes).
8. If necessary, repeat the percolation test in multiple locations to ensure consistency and reliability of the results.
9. Based on the collected data, calculate the percolation rate per minute and per hour, and record these values on the percolation test form.

Who needs percolation test data:

1. Homeowners planning to install a septic system on their property need percolation test data to determine the suitability of the soil for proper wastewater treatment and disposal.
2. Contractors and engineers rely on percolation test data to design septic systems that meet local regulations and ensure efficient and environmentally friendly wastewater treatment.
3. Local government authorities and health departments often require percolation test data before granting permits for septic system installations, as it ensures compliance with health and safety standards.

For pdfFiller’s FAQs

How can I send percolation test data for eSignature?

Once you are ready to share your percolation test data, you can easily send it to others and get the eSigned document back just as quickly. Share your PDF by email, fax, text message, or USPS mail, or notarize it online. You can do all of this without ever leaving your account.

How do I fill out percolation test data using my mobile device?

Use the pdfFiller mobile app to fill out and sign percolation test data on your phone or tablet. Visit our website to learn more about our mobile apps, how they work, and how to get started.

How do I edit percolation test data on an iOS device?

You certainly can. You can quickly edit, distribute, and sign percolation test data on your iOS device with the pdfFiller mobile app. Purchase it from the Apple Store and install it in seconds. The program is free, but in order to purchase a subscription or activate a free trial, you must first establish an account.

What is percolation test data?

Percolation test data is data collected from a test that determines the ability of soil to absorb water.

Who is required to file percolation test data?

Property owners or developers who are planning to build a septic system or any structure that requires knowledge of soil absorption rates.

How to fill out percolation test data?

Percolation test data is typically collected by a licensed professional who conducts the test on the property. The data is then recorded and reported to the relevant authorities.

What is the purpose of percolation test data?

The purpose of percolation test data is to determine the ability of soil to absorb water, which is necessary for the design and installation of septic systems or drainage systems.

What information must be reported on percolation test data?

Percolation test data typically includes information on the location of the test, the type of soil, the results of the test, and any other relevant details.