Get the free Slurry Seal Application Checklist - fhwa dot

This checklist guides State and local highway maintenance and inspection staff in the use of innovative pavement preventive maintenance processes, specifically for applying slurry seal in pavement

How to fill out slurry seal application checklist

How to fill out Slurry Seal Application Checklist

1. Gather all necessary materials and documents related to the slurry seal process.
2. Begin by reading the instructions provided in the Slurry Seal Application Checklist.
3. Fill in the project information section with accurate details, including the project name and location.
4. List the materials to be used for the slurry seal, ensuring they comply with the specifications.
5. Indicate the proposed start and end dates for the application.
6. Provide contact information for the project manager or responsible person.
7. Attach any required supporting documents, such as drawings or previous inspection reports.
8. Review the checklist thoroughly for any missed items or inaccuracies.
9. Sign and date the application before submission.

Who needs Slurry Seal Application Checklist?

1. Contractors who plan to perform slurry seal work.
2. Municipalities and local government officials overseeing road maintenance.
3. Engineers and project managers involved in road construction and maintenance projects.
4. Quality control personnel responsible for ensuring compliance with specifications.

People Also Ask about

What is the difference between Type 1 and Type 2 slurry seals?

The Type I slurries are the finest and are used for lightly trafficked roads or parking lots. Type II slurries are coarser and are suggested for raveling and oxidation on roadways with moderate to heavy traffic volumes.

How to mix slurry seal?

The addition of water is necessary in order to obtain the correct slurry consistency. As a guide 160 litres of water per cubic metre of dry aggregate should be added (approximately 70-80% of the emulsion quantity). This, however, will vary with the type of aggregate and the prevailing temperature on site.

What is the ratio for slurry mix?

The approximate SBR slurry mix ratio is 1 part SBR: 1 part water: 5 parts cement (by volume). The resulting SBR cement slurry gives an approximate coverage of 30m² per 5 litres of SBR per coat. Note: Do not over mix - you want to prevent excessive air in the SBR slurry. Hand mixing is strongly recommended.

What is the application rate for slurry seal?

Emulsified asphalt slurry seal is used to seal small s and correct moderate surface condition. Apply this type at a rate of 10 to 20 lbs/yd² (5.5 to 11 kg/m²) based on dry aggregate weight. If more than 20 lbs/yd² (11 kg/m²) of emulsified asphalt slurry seal is required, apply additional lifts of the same mixture.

What is the ratio for the slurry test?

0:27 1:42 Water a measuring cup a fresh sample of your soil distilled water and a magnetic stir or stirringMoreWater a measuring cup a fresh sample of your soil distilled water and a magnetic stir or stirring utensil. First put your soil into the container. Next add your distilled. Water.

What is the proper slurry ratio?

0:07 0:54 Right before you pour it into the hot food what we're about to show you is a crucial step otherwiseMoreRight before you pour it into the hot food what we're about to show you is a crucial step otherwise your food will become clumpy. Might as well my dad recommends using small amounts at a time.

What is the mix ratio for slurry seal?

The slurry seal mixture shall contain an emulsion content of 10 – 20% by weight of dry aggregate which shall be determined in the laboratory by an approved mix design process. The residual asphalt content shall be 5 – 15% based on weight of dry aggregate.

For pdfFiller’s FAQs

What is Slurry Seal Application Checklist?

The Slurry Seal Application Checklist is a structured document used to ensure all necessary procedures and conditions are met before applying a slurry seal to a surface. It includes steps for surface preparation, material specifications, and application methods.

Who is required to file Slurry Seal Application Checklist?

Typically, contractors or personnel responsible for road maintenance and surface treatments are required to file the Slurry Seal Application Checklist to ensure compliance with project specifications and safety standards.

How to fill out Slurry Seal Application Checklist?

To fill out the Slurry Seal Application Checklist, start by providing project details, then verify each required step and condition outlined in the checklist, ensuring that all relevant information is accurately noted and any necessary signatures are obtained.

What is the purpose of Slurry Seal Application Checklist?

The purpose of the Slurry Seal Application Checklist is to promote quality control and ensure that all necessary precautions, equipment, and materials are in place to execute a successful slurry seal application, thus extending the life of the pavement.

What information must be reported on Slurry Seal Application Checklist?

The information that must be reported on the Slurry Seal Application Checklist includes project name, date of application, weather conditions, surface preparation details, material specifications, equipment used, and any observations during application.