Get the free Icosahedral and other quasicrystalline phases in magnetic alloy systems - dtic

This document is a final report detailing research on the magnetic properties of quasicrystalline alloys, particularly focusing on the synthesis and characteristics of magnetic icosahedral quasicrystals

How to fill out icosahedral and oformr quasicrystalline

How to fill out Icosahedral and other quasicrystalline phases in magnetic alloy systems

1. Begin by selecting the appropriate precursor materials for the magnetic alloy system.
2. Determine the desired stoichiometry for the alloy to ensure the correct proportion of elements.
3. Employ methods such as mechanical alloying or rapid solidification to create a homogeneous mixture of the elements.
4. Utilize high-energy ball milling to achieve the desired particle size and distribution for optimal quasicrystalline formation.
5. Heat treat the alloy at specified temperatures to promote the formation of icosahedral and quasicrystalline phases.
6. Monitor the cooling rate as it significantly affects the stability of quasicrystalline structures.
7. Characterize the resulting phases using X-ray diffraction (XRD) or electron microscopy to confirm the presence of quasicrystalline phases.
8. Adjust processing parameters if necessary to optimize the quasicrystalline fraction in the final product.

Who needs Icosahedral and other quasicrystalline phases in magnetic alloy systems?

1. Researchers and scientists working in material science and solid-state physics.
2. Industries focused on advanced materials for electronics, photonics, or energy applications.
3. Manufacturers looking for improved magnetic properties in lightweight materials.
4. Developers of new magnetic alloys for applications in motors, generators, and sensors.

People Also Ask about

What is a quasicrystal?

Quasicrystals are binary or ternary alloys with a very narrow composition range, in which the arrangement of atoms has no long-range periodicity, but exhibits a high degree of symmetry including the unusual fivefold rotational one.

What is an example of a quasi crystal?

Quasicrystals are found most often in aluminium alloys (Al–Li–Cu, Al–Mn–Si, Al–Ni–Co, Al–Pd–Mn, Al–Cu–Fe, Al–Cu–V, etc.), but numerous other compositions are also known (Cd–Yb, Ti–Zr–Ni, Zn–Mg–Ho, Zn–Mg–Sc, In–Ag–Yb, Pd–U–Si, etc.).

What is the difference between a crystal and a quasicrystal?

In crystals, atoms are arranged in a repeating pattern. In quasicrystals, they are still ordered but the pattern is not periodic: it doesn't repeat. This oddity results in unexpected rotational symmetries (different from, say, that of a square lattice, which repeats itself four times in a full rotation).

What is the quasi crystal theory?

In subject area: Physics and Astronomy. A quasicrystal is defined as a structure that exhibits a highly fragmented energy spectrum with a self-similar pattern, resembling Cantor sets in the thermodynamic limit, formed by the incommensurate arrangement of periodic unit cells in one dimension.

What is an example of a quasi crystal?

However, quasicrystals allow for ten-fold symmetry with unlimited layers of quasicrystal patterns and various shapes. The penrose tiles (Figure 2) is an example of one-dimensional quasicrystal pattern, while the kitchen tiles of your home is an example of a traditional crystal pattern.

What is the difference between a crystal and a quasicrystal?

Regular crystals exhibit two-fold, three-fold, four-fold, or six-fold symmetry at the atomic level. This means they can be divided into equal halves in two, three, four, or six ways. Quasicrystals can additionally exhibit five-fold, ten-fold, or twelve-fold symmetry.

What is quasicrystalline phase?

Quasicrystals are novel phases of matter with long-range order exhibiting the symmetry elements forbidden to periodic crystals (Bindi et al., 2015). The first and, until now, the only known natural quasicrystal, Al63Cu24Fe13 with icosahedral symmetry was reported in 2009.

For pdfFiller’s FAQs

What is Icosahedral and other quasicrystalline phases in magnetic alloy systems?

Icosahedral and other quasicrystalline phases are non-periodic structures that exhibit symmetrical arrangements, commonly found in certain magnetic alloy systems. These phases have unique physical properties and are characterized by their ability to maintain long-range order without repeating unit cells, which can lead to unusual magnetic and mechanical properties.

Who is required to file Icosahedral and other quasicrystalline phases in magnetic alloy systems?

Researchers and manufacturers working with magnetic alloy systems that exhibit icosahedral and other quasicrystalline phases are typically required to file documentation. This may include materials scientists, metallurgists, and engineers involved in the development and characterization of these materials.

How to fill out Icosahedral and other quasicrystalline phases in magnetic alloy systems?

Filling out documentation regarding icosahedral and other quasicrystalline phases involves providing detailed descriptions of the materials used, the methods of synthesis, structural analysis, and physical property measurements. Specific forms or online platforms may need to be utilized, depending on the regulatory or research framework in place.

What is the purpose of Icosahedral and other quasicrystalline phases in magnetic alloy systems?

The purpose of understanding and utilizing icosahedral and other quasicrystalline phases in magnetic alloy systems is to harness their unique properties for advanced applications. These materials can exhibit superior magnetic characteristics, enhanced strength, and improved resistance to wear and corrosion, making them suitable for various technological advancements.

What information must be reported on Icosahedral and other quasicrystalline phases in magnetic alloy systems?

Information that must be reported includes the specific compositions of the alloys, the phase diagrams, details of the synthesis and processing methods, characterization techniques employed (such as X-ray diffraction or electron microscopy), and the resultant physical properties. Additionally, any relevant performance metrics or applications should be documented.