Get the free Underground Injection Control (UIC) Class V Well Study - epa

This questionnaire collects information regarding aquaculture wells for the U.S. Environmental Protection Agency as part of a study on underground injection control.

How to fill out underground injection control uic

How to fill out Underground Injection Control (UIC) Class V Well Study

1. Identify the purpose of your Class V well and gather any necessary documentation.
2. Determine the type of Class V injection well you are studying (e.g., underground sources of drinking water, stormwater infiltration).
3. Complete the UIC Form 7520-15 with the required information about the well's location, depth, and construction details.
4. Provide information about the injected fluid, including its composition and purpose of injection.
5. Include any required technical reports or studies that demonstrate the well's compliance with EPA regulations.
6. Review and verify that all sections of the form and accompanying documents are complete and accurate.
7. Submit the completed UIC Class V Well Study package to your state or tribal UIC program for review.

Who needs Underground Injection Control (UIC) Class V Well Study?

1. Businesses or industries that operate Class V injection wells.
2. Environmental consultants working on projects involving underground injection.
3. Regulatory agencies managing water quality and injection well compliance.
4. Property developers planning to use Class V wells for stormwater or wastewater management.

People Also Ask about

What is a Class V UIC well?

A Class V UIC well is a system used to inject nonhazardous fluids underground either into or above underground sources of drinking water. UIC well types range from simple shallow wells (e.g., dry wells, cesspools, and septic system leach fields) to complex experimental injection technologies.

What is the difference between Class 2 and Class VI wells?

The capital requirements for Class II wells are similar to other well classes, except for Class VI which tends to be much more intensive in both cost and scope. Class VI wells require expansive testing and monitoring infrastructure to be put in place to support carbon capture and sequestration.

What are the different types of UIC wells?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, isolated rock formations. Class II wells are used exclusively to inject fluids associated with oil and natural gas production. Class III wells are used to inject fluids to dissolve and extract minerals.

What is a Class 4 well?

Class IV wells are shallow wells used to dispose hazardous or radioactive wastes into or above a geologic formation that contains an underground source of drinking water (USDW).

What is a class 1 injection well?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, confined rock formations. Class I wells are typically drilled thousands of feet below the lowermost underground source of drinking water (USDW). Approximately 800 operational Class I wells exist in the United States.

What is the difference between Class 2 and Class VI wells?

The capital requirements for Class II wells are similar to other well classes, except for Class VI which tends to be much more intensive in both cost and scope. Class VI wells require expansive testing and monitoring infrastructure to be put in place to support carbon capture and sequestration.

What are class V wells?

Class V wells are used to inject non-hazardous fluids underground. Most Class V wells are used to dispose of wastes into or above underground sources of drinking water. This disposal can pose a threat to ground water quality if not managed properly.

What are the classes of UIC wells?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, isolated rock formations. Class II wells are used exclusively to inject fluids associated with oil and natural gas production. Class III wells are used to inject fluids to dissolve and extract minerals.

For pdfFiller’s FAQs

What is Underground Injection Control (UIC) Class V Well Study?

The Underground Injection Control (UIC) Class V Well Study is an assessment that aims to evaluate the types and impacts of Class V injection wells, which are used for non-hazardous waste disposal and other purposes. It supports regulatory frameworks to ensure these wells are monitored and managed to protect underground sources of drinking water.

Who is required to file Underground Injection Control (UIC) Class V Well Study?

Operators of Class V injection wells are required to file the UIC Class V Well Study. This typically includes businesses or organizations that use these wells for activities such as wastewater disposal or aquifer recharge.

How to fill out Underground Injection Control (UIC) Class V Well Study?

To fill out the UIC Class V Well Study, operators need to complete the designated forms by providing detailed information about the well location, type, depth, the nature of the injected fluid, and compliance with relevant regulations. It is beneficial to refer to guidelines provided by the Environmental Protection Agency (EPA) for a comprehensive understanding.

What is the purpose of Underground Injection Control (UIC) Class V Well Study?

The purpose of the UIC Class V Well Study is to gather data on underground injection activities to assess their potential risks to drinking water sources. This information aids regulatory bodies in developing safety measures and guidelines to protect public health and the environment.

What information must be reported on Underground Injection Control (UIC) Class V Well Study?

The report must include detailed information such as the well’s physical characteristics, the type of fluids being injected, volume and frequency of injection, operational procedures, potential contaminants, and monitoring practices in place.