Get the free Underground Injection Control (UIC) Class V Well Study - epa

This document is a questionnaire for gathering information about storm water drainage wells as required by the U.S. Environmental Protection Agency under the Underground Injection Control program.

How to fill out underground injection control uic

How to fill out Underground Injection Control (UIC) Class V Well Study

1. Gather all necessary documents and information regarding the well location.
2. Identify the type of fluid to be injected and its source.
3. Determine the geological and hydrological characteristics of the site.
4. Fill out the required UIC application form accurately.
5. Include details about the well construction and operation plans.
6. Provide data on potential impacts to surrounding water sources.
7. Review local, state, and federal regulations related to UIC compliance.
8. Submit the completed application to the appropriate regulatory agency.

Who needs Underground Injection Control (UIC) Class V Well Study?

1. Businesses or entities planning to operate Class V wells for non-hazardous injection purposes.
2. Municipalities needing to manage stormwater or other fluid waste.
3. Environmental consultants conducting studies related to groundwater protection.
4. Regulatory agencies overseeing underground injection activities.

People Also Ask about

What is a Class V UIC well?

A Class V UIC well is a system used to inject nonhazardous fluids underground either into or above underground sources of drinking water. UIC well types range from simple shallow wells (e.g., dry wells, cesspools, and septic system leach fields) to complex experimental injection technologies.

What is the difference between Class 2 and Class VI wells?

The capital requirements for Class II wells are similar to other well classes, except for Class VI which tends to be much more intensive in both cost and scope. Class VI wells require expansive testing and monitoring infrastructure to be put in place to support carbon capture and sequestration.

What are the different types of UIC wells?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, isolated rock formations. Class II wells are used exclusively to inject fluids associated with oil and natural gas production. Class III wells are used to inject fluids to dissolve and extract minerals.

What is a Class 4 well?

Class IV wells are shallow wells used to dispose hazardous or radioactive wastes into or above a geologic formation that contains an underground source of drinking water (USDW).

What is a class 1 injection well?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, confined rock formations. Class I wells are typically drilled thousands of feet below the lowermost underground source of drinking water (USDW). Approximately 800 operational Class I wells exist in the United States.

What is the difference between Class 2 and Class VI wells?

The capital requirements for Class II wells are similar to other well classes, except for Class VI which tends to be much more intensive in both cost and scope. Class VI wells require expansive testing and monitoring infrastructure to be put in place to support carbon capture and sequestration.

What are class V wells?

Class V wells are used to inject non-hazardous fluids underground. Most Class V wells are used to dispose of wastes into or above underground sources of drinking water. This disposal can pose a threat to ground water quality if not managed properly.

What are the classes of UIC wells?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, isolated rock formations. Class II wells are used exclusively to inject fluids associated with oil and natural gas production. Class III wells are used to inject fluids to dissolve and extract minerals.

For pdfFiller’s FAQs

What is Underground Injection Control (UIC) Class V Well Study?

The Underground Injection Control (UIC) Class V Well Study is a regulatory framework established by the Environmental Protection Agency (EPA) to assess and manage the potential environmental and public health risks associated with certain types of shallow wells that are used to inject non-hazardous fluids underground.

Who is required to file Underground Injection Control (UIC) Class V Well Study?

Owners and operators of Class V injection wells that inject non-hazardous fluids into or above the underground sources of drinking water (USDWs) are required to file the UIC Class V Well Study, as part of their compliance with federal and state regulations.

How to fill out Underground Injection Control (UIC) Class V Well Study?

To fill out the UIC Class V Well Study, the owner/operator must complete a standardized form that includes information about the well location, construction details, the nature of injected fluids, and potential impacts on drinking water sources. Guidance and resources are typically provided by the EPA and state UIC programs.

What is the purpose of Underground Injection Control (UIC) Class V Well Study?

The purpose of the UIC Class V Well Study is to ensure that injection activities do not harm underground sources of drinking water, to provide a clear assessment of the potential risks associated with such activities, and to ensure compliance with environmental protection standards.

What information must be reported on Underground Injection Control (UIC) Class V Well Study?

The information that must be reported includes the well's location, type of well, details of the injected fluids, construction materials, operational history, and any monitoring data relevant to the environmental impact on the underground sources of drinking water.