Get the free CONTRACTOR MIX DESIGN GUIDELINES for ASPHALT CONCRETE

This document outlines the procedures for developing, testing, and submitting asphalt concrete mix designs for contracts with the Oregon Department of Transportation.

How to fill out contractor mix design guidelines

How to fill out CONTRACTOR MIX DESIGN GUIDELINES for ASPHALT CONCRETE

1. Gather necessary information about the project requirements, such as traffic levels, climate conditions, and specific performance criteria.
2. Review the specifications and guidelines provided by regulatory agencies or project owners for asphalt mix design.
3. Select appropriate materials for the asphalt mixture, including aggregates, asphalt binder, and any additives.
4. Determine the optimal aggregate gradation by conducting sieve analyses and ensuring compliance with specifications.
5. Establish the correct binder content through trial mixes and testing to ensure performance standards are met.
6. Document all mix design calculations, including volumetric properties and anticipated performance characteristics.
7. Prepare a detailed report summarizing the mix design process, materials used, test results, and compliance with guidelines.
8. Submit the completed mix design documentation to the appropriate authority for review and approval.

Who needs CONTRACTOR MIX DESIGN GUIDELINES for ASPHALT CONCRETE?

1. Contractors involved in asphalt paving projects.
2. Civil engineers and project managers overseeing road construction.
3. Quality control and assurance personnel responsible for testing materials.
4. Regulatory authorities or agencies that establish construction standards.

People Also Ask about

How to make asphalt concrete?

During asphalt concrete mixing, the aggregates are blended with about 5% bitumen to produce the asphalt pavement. This mixture is then heated to an appropriate temperature and mixed to ensure a uniform distribution of the binder and a homogeneous consistency of the final product.

What is asphalt concrete mix design?

Mix design is a process to manipulate three variables: (1) aggregate, (2) asphalt binder content and (3) the ratio of aggregate to asphalt binder with the objective of obtaining an HMA that is deformation resistant, fatigue resistant, low temperature resistant, durable, moisture damage resistant, skid resistant

What is the difference between asphalt cement and asphalt concrete?

Asphalt is a mixture of bitumen (a gummy hydrocarbon of black color sourced from natural deposits or as a byproduct of crude oil) and aggregate. Meanwhile, concrete is a mix of an aggregate and a cement binder that hardens the mixture and gives it that rock-like appearance.

What is the best concrete mix ratio for a driveway?

A good basic concrete mix ratio is a 1: 2: 3 mix design (1 cement: 2 sand: 3 aggregate). There are different mix ratios and aggregate options for different types of concrete projects, but a standard 1: 2: 3 mix design would make a good mix for almost any project and will make a strong finished concrete product. Make.

What is the mix design for pavement concrete based on?

The basic principle of the concrete mix design is to select the proportion of all the ingredients on the basis of their absolute volume and taking total absolute volume of concrete 1 m3.

What is the mixing ratio for asphalt concrete?

Asphalt concrete is a combination of two primary ingredients: (i) aggregate and (ii) asphalt cement. Typically, the aggregate constitutes 90–95% (w/w) of the total mixture and the asphalt cement (asphalt binder) constitutes 5–10% (w/w) of the total mixture to form the asphalt concrete.

What is the mix design of asphalt concrete?

Mix design is a process to manipulate three variables: (1) aggregate, (2) asphalt binder content and (3) the ratio of aggregate to asphalt binder with the objective of obtaining an HMA that is deformation resistant, fatigue resistant, low temperature resistant, durable, moisture damage resistant, skid resistant

What are the standards for concrete mix design?

A properly designed concrete mixture will possess the desired workability for the fresh concrete and the required durability and strength for the hardened concrete. Typically, the volume of a mix is about 10 to 15% cementitious material, 60 to 75% aggregate, and 15 to 20% water.

For pdfFiller’s FAQs

What is CONTRACTOR MIX DESIGN GUIDELINES for ASPHALT CONCRETE?

The Contractor Mix Design Guidelines for Asphalt Concrete provide standards and procedures to create asphalt mixtures that meet specified performance and durability criteria for construction projects.

Who is required to file CONTRACTOR MIX DESIGN GUIDELINES for ASPHALT CONCRETE?

Contractors responsible for asphalt pavement construction are required to file the Contractor Mix Design Guidelines to ensure their mix designs meet regulatory and project specifications.

How to fill out CONTRACTOR MIX DESIGN GUIDELINES for ASPHALT CONCRETE?

To fill out the Contractor Mix Design Guidelines, contractors must provide detailed information about the materials used, the proposed mix design, testing results, and compliance with specified standards.

What is the purpose of CONTRACTOR MIX DESIGN GUIDELINES for ASPHALT CONCRETE?

The purpose of the Contractor Mix Design Guidelines is to ensure that asphalt mixtures are designed to achieve optimal performance characteristics, structural integrity, and longevity for roadways and other surfaces.

What information must be reported on CONTRACTOR MIX DESIGN GUIDELINES for ASPHALT CONCRETE?

Information that must be reported includes aggregate properties, asphalt binder type and grade, mix proportions, design criteria, and results from relevant tests such as density and stability.