Get the free Bloodborne Pathogen Exposure Control Plan - emich

This document outlines the procedures and responsibilities for minimizing occupational exposure to bloodborne pathogens at Eastern Michigan University, in compliance with federal and state safety

How to fill out bloodborne pathogen exposure control

How to fill out Bloodborne Pathogen Exposure Control Plan

1. Begin with the introduction section, stating the purpose of the Bloodborne Pathogen Exposure Control Plan.
2. Identify the scope of the plan, including the locations and employees it covers.
3. List the bloodborne pathogens that are recognized as potential hazards.
4. Define the exposure determination, categorizing employees based on their risk of exposure to blood or other potentially infectious materials.
5. Outline the procedures for exposure prevention, including the use of personal protective equipment (PPE) and engineering controls.
6. Describe the process for reporting exposure incidents and the steps to be taken following an exposure.
7. Include information on vaccination and post-exposure follow-up protocols.
8. Provide training requirements for employees about bloodborne pathogens and the Exposure Control Plan.
9. Establish a system for recordkeeping and documentation of training, incidents, and vaccinations.
10. Schedule regular review and updates of the Exposure Control Plan to ensure it remains current.

Who needs Bloodborne Pathogen Exposure Control Plan?

1. Healthcare workers who handle blood or other potentially infectious materials.
2. Laboratory personnel working with blood samples.
3. Emergency responders who come into contact with blood during their duties.
4. Janitorial staff who may clean areas contaminated with blood or other biohazards.
5. Non-healthcare employees in facilities where exposure risks exist, such as public safety or correctional facilities.

People Also Ask about

What is the exposure control plan for blood-borne pathogens?

It details in writing your plan for reducing exposures to blood and explains what steps to take if an exposure occurs. The plan specifies all steps taken your facility to protect your workers. First — and most important — your Exposure Control Plan helps you protect your workers from exposure to bloodborne pathogens.

What are the five steps of an exposure control plan?

What are the 5 steps of an exposure control plan? Put on required personal protective equipment (PPE). Gather all necessary equipment, including but not limited to: Decontaminate the exposed area. Dispose of all cleanup materials and biohazard waste. Decontaminate all reusable equipment. Thoroughly wash your hands.

What are the steps of exposure control?

What are the 5 steps of an exposure control plan? Put on required personal protective equipment (PPE). Gather all necessary equipment, including but not limited to: Decontaminate the exposed area. Dispose of all cleanup materials and biohazard waste. Decontaminate all reusable equipment. Thoroughly wash your hands.

What are the components of the exposure control plan?

An exposure control plan addresses the worksite hazards; everything from your chemical inventory, processes, maintenance activities, as well as physical hazards that may pose an exposure risk. You should also think about certain categories of chemicals.

What is the exposure control plan by OSHA?

The purpose of the exposure control plan is to: 1. Eliminate or minimize employee occupational exposure to blood or certain other body fluids; 2. Comply with the OSHA Bloodborne Pathogens standard 1910.1030.

What are the 5 steps to take if you think you've been exposed to bloodborne pathogens?

What should you do if you're exposed? Wash needlesticks and cuts with soap and water. Flush splashes to nose, mouth, or skin with water. Irrigate eyes with clean water, saline, or sterile wash. Report all exposures promptly to ensure that you receive appropriate followup care.

What are the guidelines for managing exposures to blood-borne pathogens?

Wash the site of the needlestick or cut with soap and water. Flush splashes to the nose, mouth, or skin with water. Irrigate eyes with clean water, saline, or sterile irrigants. Report the incident to your supervisor or the person in your practice responsible for managing exposures.

What is the bloodborne pathogens standard plan?

The Bloodborne Pathogen Standard: Requires the use of Universal Precautions, an approach to infection control in which workers treat all human blood and certain human body fluids as if they are known to be infectious, to protect against pathogens.

For pdfFiller’s FAQs

What is Bloodborne Pathogen Exposure Control Plan?

The Bloodborne Pathogen Exposure Control Plan is a written document outlining procedures, safeguards, and practices to protect employees from potential exposure to bloodborne pathogens, such as HIV and hepatitis B.

Who is required to file Bloodborne Pathogen Exposure Control Plan?

Employers in certain sectors, particularly healthcare and related fields, are required to file a Bloodborne Pathogen Exposure Control Plan if their employees are at risk of occupational exposure to bloodborne pathogens.

How to fill out Bloodborne Pathogen Exposure Control Plan?

To fill out a Bloodborne Pathogen Exposure Control Plan, employers should assess occupational exposure risks, implement appropriate control measures, provide employee training programs, and document procedures and reporting mechanisms.

What is the purpose of Bloodborne Pathogen Exposure Control Plan?

The purpose of the Bloodborne Pathogen Exposure Control Plan is to minimize the risk of exposure to bloodborne pathogens in the workplace, ensuring the safety and health of employees.

What information must be reported on Bloodborne Pathogen Exposure Control Plan?

The plan must report information including exposure determination, implementation of use of engineering and work practice controls, personal protective equipment requirements, training provisions, and procedures for post-exposure evaluation and follow-up.