Get the free Hot Work Permit - georgiahealth

A safety document required for conducting hot work operations, ensuring risks are managed by detailing safety measures and requirements.

How to fill out hot work permit

How to fill out Hot Work Permit

1. Identify the area where hot work will occur.
2. Ensure that all necessary safety precautions are in place.
3. Complete the permit form with details such as location, nature of the work, and duration.
4. Obtain signatures from responsible personnel and safety officers.
5. Communicate the hot work operation to all affected employees.
6. Keep the permit on site until the work is completed and the area is deemed safe.

Who needs Hot Work Permit?

1. Any workers performing tasks that produce sparks, flames, or heat, such as welding, cutting, or soldering.
2. Supervisors overseeing hot work operations.
3. Safety personnel responsible for ensuring compliance with safety standards.

People Also Ask about

Is a hot work permit required for grinding?

The main difference between cold work permits and hot work permits is the level of risk involved. Cold work permits are generally used for activities that pose little to no risk of igniting a fire, while hot work permits are required for any job that involves using an open flame.

What is a hot work permit?

The employer shall instruct all employees involved in hot work operations as to potential fire hazards and the use of firefighting equipment. Drums and containers which contain or have contained flammable or combustible liquids shall be kept closed. Empty containers shall be removed from the hot work area.

What is required in order to perform hot work?

If doing Hot Work is performed outside a Designated Area: Complete the FM Global Hot Work Permit and maintain the 35 Foot-Rule; Keep combustible materials 35ft from the point of operation, Or protect combustibles by a listed or approved welding curtain, welding blanket, welding pad, or equivalent.

What are the OSHA requirements for hot work?

Hot work permits are typically needed for any piece of work – like welding, cutting, grinding, soldering or brazing – generating heat, sparks or open flames that could ignite nearby combustibles.

What are the OSHA requirements for hot surfaces?

California. California's Heat Illness Prevention Standard requires employers to provide training, water, shade, and planning. A temperature of 80°F triggers the requirements.

What is the 35 foot rule for hot work?

All exposed steam and hot-water pipes within 7 feet of the floor or working platform or within 15 inches measured horizontally from stairways, ramps, or fixed ladders shall be covered with an insulating material, or guarded in such manner as to prevent contact.

For pdfFiller’s FAQs

What is Hot Work Permit?

A Hot Work Permit is an official document that authorizes specific hot work operations, such as welding, cutting, or grinding, in areas where flammable or combustible materials may be present.

Who is required to file Hot Work Permit?

A Hot Work Permit must be filed by the person or contractor performing the hot work, who is typically trained in safety procedures and fire prevention.

How to fill out Hot Work Permit?

To fill out a Hot Work Permit, provide details such as the location of the work, the type of hot work being performed, the duration of the work, safety precautions to be implemented, and the signature of the responsible supervisor.

What is the purpose of Hot Work Permit?

The purpose of a Hot Work Permit is to ensure that all safety measures are followed to prevent fire hazards during hot work operations and to maintain a safe working environment.

What information must be reported on Hot Work Permit?

The Hot Work Permit must report information including the work location, type of hot work, date and time of the work, name of the person performing the work, safety measures taken, and any special instructions.