Get the free Application for Well Registration

This document serves as an application for the registration of new wells drilled on or after October 1, 2010, as required by the Northern Trinity Groundwater Conservation District. It requires various

How to fill out application for well registration

How to fill out Application for Well Registration

1. Obtain a copy of the Application for Well Registration form from your local water authority or their website.
2. Start by filling out your personal information, including your name, address, and contact details.
3. Specify the location of the well by providing accurate geographical coordinates or nearby landmarks.
4. Detail the purpose of the well, explaining if it’s for residential, agricultural, or commercial use.
5. Indicate the expected depth of the well and the type of pump to be used.
6. Provide information about the land ownership and any relevant land-use permits.
7. Review the instructions for any additional documentation required, such as water quality testing or environmental assessments.
8. Sign and date the application form to certify its accuracy.
9. Submit the completed application form to the appropriate water authority, either in person or online, along with any required payment.

Who needs Application for Well Registration?

1. Homeowners looking to drill a well for personal water supply.
2. Farmers needing to create a well for irrigation purposes.
3. Businesses that require a well for operational water use.
4. Contractors involved in the drilling and construction of wells.
5. Environmental or conservation organizations aiming to assess water source impacts.

People Also Ask about

How to get a well on your property?

Drilling a well often requires permits or licensed contractors, depending on your state. A well needs to be at least 10 feet away from other buildings. Well regulations include keeping 100 feet between a well and septic system. Well water requires annual testing.

How do I know what kind of well I have?

Types of wells Dug wells have a large diameter, are shallow (approximately 10 to 30 feet deep) and are not cased continuously. Driven wells are constructed by driving pipe into the ground. Driven wells are cased continuously and shallow (approximately 30 to 50 feet deep).

Is it legal to dig a well in your backyard in California?

Drilling a well without obtaining the required permits can have severe legal consequences in California. Violating the well drilling regulations is considered a misdemeanor, punishable by fines, penalties, and potential legal actions.

How to find the well on your property?

Clues to the location of these wells include: Pipes sticking out of the ground. Small buildings that may have been a well house. Depressions in the ground. The presence of concrete vaults or pits (perhaps covered by lumber or metal plates) Out-of-use windmills (windpumps) are likely to be located near an old well.

Do you need a permit for a well in California?

Well and boring permits are required for the installation, destruction or rehabilitation of all wells, probes or other vertical excavations. Wells are typically defined as any vertically drilled excavations that have a casing installed.

Can you drill a well on any property?

The short answer is that water rights are mostly handled at the state level. And while some states only allow licensed well contractors to perform any type of drilling at all, many states will allow a homeowner to dig a private well on his/her own property as long as a permit is applied for and approved.

Who do I call to check my well?

Your local health department. Your local environmental department. The U.S. EPA by calling their Drinking Water Hotline at (800) 426-4791.

Do you need a permit to dig a well in California?

Application. Download a well permit application and view completion instructions. Well and boring permits are required for the installation, destruction or rehabilitation of all wells, probes or other vertical excavations. Wells are typically defined as any vertically drilled excavations that have a casing installed.

For pdfFiller’s FAQs

What is Application for Well Registration?

The Application for Well Registration is a formal request submitted to a regulatory body to register a well for monitoring and management purposes, ensuring compliance with water resource laws.

Who is required to file Application for Well Registration?

Individuals or entities that intend to construct, modify, or operate a well that extracts groundwater in regulated areas are typically required to file an Application for Well Registration.

How to fill out Application for Well Registration?

To fill out the Application for Well Registration, complete the required fields with accurate information regarding the well's location, intended use, and construction details, and submit it to the appropriate regulatory authority.

What is the purpose of Application for Well Registration?

The purpose of the Application for Well Registration is to establish legal ownership of a well, track water usage, and help manage water resources sustainably.

What information must be reported on Application for Well Registration?

The Application for Well Registration typically requires reporting information such as the applicant's details, well location coordinates, purpose of the well, anticipated depth, and construction specifications.