Get the free RAD Incoming Radioactive Material Receipt Report - sfsu

This form is used to document the receipt of incoming radioactive materials, including procedures for surveying and disposing of packages based on contamination levels.

How to fill out rad incoming radioactive material

How to fill out RAD Incoming Radioactive Material Receipt Report

1. Begin by entering the date of receipt at the top of the form.
2. Fill in the name and address of the facility receiving the radioactive material.
3. Specify the name of the person or position that is authorized to receive the material.
4. List the name of the supplier or vendor providing the radioactive material.
5. Provide the tracking number or shipping ID associated with the shipment.
6. Detail the description of the radioactive material, including the type and quantity.
7. Include the radioactive isotopes and their respective activity levels if applicable.
8. Note any special packaging or handling instructions that were included with the shipment.
9. Confirm the condition of the package upon receipt and document any damages or discrepancies.
10. Sign and date the report to certify that the material was received appropriately.

Who needs RAD Incoming Radioactive Material Receipt Report?

1. Organizations that handle, store, or transport radioactive materials.
2. Laboratories conducting research involving radioactive substances.
3. Healthcare facilities using radioactive isotopes for diagnosis and treatment.
4. Transportation companies shipping radioactive materials.
5. Regulatory agencies overseeing the safe handling of radioactive materials.

People Also Ask about

Which of the following circumstances require notification of the NRC when receiving a radioactive package?

Under § 171.15, if a radioactive material package is broken, even if the inner packaging remains intact, an immediate notification to the NRC is required.

What are the requirements for NRC wipe test?

This test must be performed by wiping the entire radioactive surface of the source with a filter paper with the application of moderate finger pressure. The radioactivity on the filter paper must be measured using methods capable of detecting 0.185 kilobecquerel (0.005 microcurie) of americium-241 or radium-226.

How often must a radiation leak test be performed?

(1) Each sealed source (except an energy compensation source (ECS)) must be tested at intervals not to exceed 6 months. In the absence of a certificate from a transferor that a test has been made within the 6 months before the transfer, the sealed source may not be used until tested.

How to label radioactive material?

Radioactive Materials labels are based on the type and quantity of radioactive material being shipped and the associated levels of radiation. Radioactive White–I, Radioactive Yellow–II, and Radioactive Yellow–III are used as labels on radioactive material packaging.

How do you do a wipe test?

How is a Wipe Test Survey Performed? an object, is simply wiped with the filter paper. The filter paper is then placed in a liquid scintillation vial with a sufficient quantity of scintillation cocktail (Optifluor, Ultima Gold or an approved equivalent) and counted in a liquid scintillation counter (LSC).

What is a wipe test for radioactive package?

A wipe test is carried out to check the integrity of the sealed source. Ideally a wipe test should be taken of the actual source, however sometimes this is not practical and a wipe of the nearest accessible surface should be taken. The wipe should be taken by trained personnel.

What is a radiation report?

These services include radiation dose measurements for persons who enter areas where they may be exposed to radiation or radioactive material. The results are periodically reported to monitored individuals.

What is the NRC test?

A Noise Reduction Coefficient is an average rating of how much sound an acoustic product can absorb — in other words, how much quieter it can make your space. Like a sponge absorbs water, an acoustic product absorbs sound and the NRC tells us just how much sound those products can soak up.

For pdfFiller’s FAQs

What is RAD Incoming Radioactive Material Receipt Report?

The RAD Incoming Radioactive Material Receipt Report is a document used to track and verify the receipt of radioactive materials. It ensures that all incoming radioactive shipments are recorded accurately to maintain compliance with safety regulations.

Who is required to file RAD Incoming Radioactive Material Receipt Report?

Entities that handle, store, or use radioactive materials are required to file the RAD Incoming Radioactive Material Receipt Report. This includes research institutions, medical facilities, and companies involved in the manufacture or distribution of radioactive materials.

How to fill out RAD Incoming Radioactive Material Receipt Report?

To fill out the RAD Incoming Radioactive Material Receipt Report, one must provide details such as the shipment date, description of the radioactive material, the quantity received, the supplier's information, and any relevant shipping documentation. The report should be signed by the responsible individual upon receipt of the materials.

What is the purpose of RAD Incoming Radioactive Material Receipt Report?

The purpose of the RAD Incoming Radioactive Material Receipt Report is to ensure accountability and traceability of radioactive materials from their point of origin to the receiving facility. It helps in regulatory compliance and maintains safety standards.

What information must be reported on RAD Incoming Radioactive Material Receipt Report?

The information that must be reported includes the date of receipt, the name and address of the supplier, the type and quantity of radioactive material received, the serial numbers or batch numbers, any applicable licensing information, and confirmation that the materials were received in satisfactory condition.