Get the free Lockout/Tagout Policy - calvin

This document outlines the Lockout/Tagout (LO/TO) policy at Calvin College, including safety procedures to control hazardous energy during maintenance and servicing of equipment, roles of authorized

How to fill out lockouttagout policy - calvin

How to fill out Lockout/Tagout Policy

1. Identify all equipment and machinery that require lockout/tagout procedures.
2. Develop a written lockout/tagout policy that outlines specific steps for each piece of equipment.
3. Train employees on the lockout/tagout procedures, ensuring they understand the importance of safety.
4. Determine energy sources for each piece of equipment and how to isolate them.
5. Create a padlock and tag system that allows employees to securely lock out equipment.
6. Establish a procedure for notifying affected employees before locks are applied or removed.
7. Implement regular audits and inspections to ensure compliance with the lockout/tagout policy.

Who needs Lockout/Tagout Policy?

1. All workers who service or maintain equipment and machinery.
2. Supervisors and managers responsible for employee safety.
3. Safety personnel overseeing workplace safety protocols.
4. Contractors and third-party service providers working on site.

People Also Ask about

What are the 9 steps of LOTO?

The eight basic steps to a LOTO procedure are as follows: Prepare for the shutdown. Notify affected employees. Shut down the equipment. Isolate energy sources. Apply LOTO devices to energy sources. Release/control all stored energy. Verify the lockout. Maintain the lockout.

What are the 7 steps of lockout tagout?

How LOTO Works. #1: Notify Employees. #2: Identify Energy Sources. #3: Shut Down Equipment. #4: Deactivate Energy Isolating Devices. #5: Apply Applicable LOTO Devices. #6: Dissipate Stored Energy. #7: Verify Energy Isolation.

What are the rules for lockout tagout?

Lockout/Tagout Procedures — Keep it Simple, Keep it Safe Controlling Hazardous Energy. Prepare for the shutdown. Notify affected employees. Shut down the equipment. Isolate energy sources. Apply LOTO devices to energy sources. Release/control all stored energy. Verify the lockout.

What is the correct order of steps for lockout?

8 Steps of Lockout-Tagout (LOTO) Procedure Preparation. Notification & Shutdown. Isolation. Lockout-Tagout. Secure or Release Stored Energy. Isolation Verification. Maintaining Lockout During Service. Putting the Equipment Back into Service.

What are the 7 steps of a basic isolation procedure?

However, every isolation procedure should include the following basic steps: Shut the plant down. Identify all energy sources and other hazards. Identify all isolation points. Isolate all energy sources. De-energise all stored energies. Locking out all isolation points. Tagging. Testing isolation procedure.

How to write a lockout tag out procedure?

Use only lockout/tagout devices authorized for the particular equipment or machinery and ensure that they are durable, standardized and substantial. Ensure that lockout/tagout devices identify the individual users.

For pdfFiller’s FAQs

What is Lockout/Tagout Policy?

The Lockout/Tagout (LOTO) Policy is a safety protocol used in industrial and other workplaces to ensure that machinery and equipment are properly shut off and not able to be started up again until maintenance or servicing is completed.

Who is required to file Lockout/Tagout Policy?

All employers with machinery or equipment that requires maintenance or servicing are required to implement and document a Lockout/Tagout Policy. Employees who work with or around that machinery must also be trained and aware of the policy.

How to fill out Lockout/Tagout Policy?

To fill out a Lockout/Tagout Policy, employers must identify and document each piece of machinery or equipment, outline the specific steps for locking and tagging out those machines during maintenance, and train affected employees on the procedures and requirements.

What is the purpose of Lockout/Tagout Policy?

The purpose of the Lockout/Tagout Policy is to prevent accidental or unexpected start-up of machinery during maintenance or servicing, thereby protecting workers from injury and ensuring compliance with safety regulations.

What information must be reported on Lockout/Tagout Policy?

The Lockout/Tagout Policy must report information about the machinery being locked out, the specific procedures for locking and tagging out, the list of authorized employees who can perform the lockout, and any training records related to the policy.