Get the free Model Stormwater Management Ordinance - temple

This document serves as a draft ordinance for municipalities to manage stormwater runoff, establish requirements for earth disturbance activities, promote groundwater recharge, and ensure overall

How to fill out model stormwater management ordinance

How to fill out Model Stormwater Management Ordinance

1. Obtain the Model Stormwater Management Ordinance document from relevant sources.
2. Review local regulations and determine the specific requirements for stormwater management in your area.
3. Customize the document to fit local conditions by adding necessary amendments.
4. Fill out sections regarding definitions, objectives, and general policies as per local needs.
5. Include provisions for design standards and maintenance requirements for stormwater management systems.
6. Specify the enforcement mechanisms and penalties for non-compliance.
7. Review the draft ordinance with local stakeholders for feedback.
8. Finalize the document based on stakeholder input and legal review.
9. Present the ordinance for adoption by the relevant governing body.

Who needs Model Stormwater Management Ordinance?

1. Local government agencies responsible for land use and environmental management.
2. Developers and builders who must adhere to stormwater regulations.
3. Environmental organizations advocating for sustainable water management practices.
4. Citizens concerned about flood management and water quality in their communities.

People Also Ask about

What is a BMP inspection?

We inspect and maintain all types of Stormwater Best Management Practices (BMPs) – with the goal of making sure these facilities remain in compliance with local stormwater regulations.

Which of the following is an example of a stormwater BMP?

Examples of Treatment Control BMPs include vegetated swales, infiltration trenches, detention/retention basins, catch basin filters, and vortex separators. These devices help remove potential pollutants from runoff prior to leaving site and entering storm drain system and our lake.

What is a BMP for stormwater?

Individual stormwater permits usually cost anywhere from a few hundred dollars to upwards of $5,000+. Individual stormwater permits typically grant you a little more freedom since they will be tailored specifically to your operation and its stormwater (and sometimes process water) discharge needs.

What does BMP stand for in water treatment?

BMP stands for Best Management Practice. Storm water management BMPs are control measures taken to mitigate changes to both quantity and quality of urban runoff caused through changes to land use.

What is the storm water management model?

EPA's Storm Water Management Model (SWMM) is used throughout the world for decision support, emergency response, planning, analysis, and design related to stormwater, combined, and sanitary sewer systems as well as for other drainage systems.

What does BMP stand for?

A basic metabolic panel (BMP) measures eight different substances in your blood. It provides important information about your body's fluid balance, your metabolism (the process your body uses to make energy from food you eat), and how well your kidneys are working. This test is often used to check your general health.

How much does a stormwater management plan cost?

1:33 5:54 C is the runoff coefficient. This is essentially the percentage of water that runs off of a givenMoreC is the runoff coefficient. This is essentially the percentage of water that runs off of a given surface. For example if rain is falling at 2 in per hour.

For pdfFiller’s FAQs

What is Model Stormwater Management Ordinance?

The Model Stormwater Management Ordinance is a regulatory framework designed to manage stormwater runoff through best management practices, ensuring proper drainage, and minimizing the impacts of urbanization on water quality.

Who is required to file Model Stormwater Management Ordinance?

Entities engaged in land development, construction, or significant land alteration typically are required to file the Model Stormwater Management Ordinance as part of the permit application process.

How to fill out Model Stormwater Management Ordinance?

To fill out the Model Stormwater Management Ordinance, applicants must provide detailed information about the proposed project, including site plans, calculations for expected stormwater runoff, and descriptions of planned stormwater management practices.

What is the purpose of Model Stormwater Management Ordinance?

The purpose of the Model Stormwater Management Ordinance is to reduce flooding, mitigate water pollution, and manage stormwater runoff to protect water resources and public health.

What information must be reported on Model Stormwater Management Ordinance?

Information that must be reported includes site details, stormwater runoff calculations, descriptions of control measures, maintenance plans, and compliance with relevant regulations and standards.