Get the free Appendix 1: Product Specification for Shared Raw Copper - spw

This document describes the equipment and application requirements, properties of shared raw copper and procedures for ordering of and fault reporting on shared raw copper at Tele Danmark.

How to fill out appendix 1 product specification

How to fill out Appendix 1: Product Specification for Shared Raw Copper

1. Start with the title section and clearly label it as 'Appendix 1: Product Specification for Shared Raw Copper'.
2. Provide a brief introduction describing the purpose of the document.
3. List the product specifications, including factors such as composition, purity levels, and any relevant industry standards.
4. Include information about the physical properties of the copper, such as electrical conductivity, thermal conductivity, and tensile strength.
5. Detail packaging requirements and storage recommendations to ensure product integrity.
6. Specify any certification requirements or compliance standards that need to be addressed.
7. Conclude with a section for signatures or approvals, indicating who has verified the information.

Who needs Appendix 1: Product Specification for Shared Raw Copper?

1. Manufacturers and suppliers involved in the production or distribution of shared raw copper.
2. Quality control teams responsible for ensuring compliance with product specifications.
3. Regulatory agencies that require documentation for compliance and safety checks.
4. Customers and end-users seeking assurance of product quality and specifications.

People Also Ask about

Should I use type M or type L copper?

Type M is used for low pressure heating, type L is minimum for all domestic waterlines, type K is typically used for heavy commercial.

Is type K copper the same as ACR?

Except for those differences between ACR (types A and D) and plumbing (types K, L, M, and DWV) pipes, the type only indicates wall thickness and does not affect the outside diameter of the tube. Type K 1⁄2 inch, type L 1⁄2 inch, and type D 5⁄8 inch ACR all have the same outside diameter of 5⁄8 inch.

What type of low quality copper tube should be treated with caution?

Are there any other systems I should treat with caution? Look out for low quality15mm copper tubing of continental original, also supplied at the time of copper shortages. It was prone to pitting, and had a very thin wall thickness, such that it could not be bent.

What psi is type L copper rated for?

Copper tube - Type L Nominal Size (in)Working Pressure (psi)Actual Burst Pressure (psi) AnnealedDrawn 1 420 5115 1 1/4 373 4550 1 1/2 347 410015 more rows

What two types of copper tube shall not be bent?

Copper Tube. 1) Types M and DWV copper tube shall not be bent.

What are the four types of copper tube?

4. Copper DWV Copper Pipe TypeDurability Type K Very strong with thick walls Type L Strong with thick walls Type M Less strong, with thinner walls; not allowed in every municipality DWV Thin, incapable of handling high pressure Sep 6, 2023

What is type K copper tubing used for?

Generally, a corroded pipe is going to look a lot rougher around the edges than a pipe that's new or in good shape. You'll probably easily detect which pipes are corroding simply by looking at them and detecting a bit of a rust color or a blue-green shade to them.

For pdfFiller’s FAQs

What is Appendix 1: Product Specification for Shared Raw Copper?

Appendix 1: Product Specification for Shared Raw Copper is a standardized document that outlines the specific requirements and characteristics for shared raw copper products used in various applications, ensuring consistency and quality across the industry.

Who is required to file Appendix 1: Product Specification for Shared Raw Copper?

Manufacturers and suppliers of shared raw copper are typically required to file Appendix 1 to certify that their products meet the specified standards and regulations.

How to fill out Appendix 1: Product Specification for Shared Raw Copper?

To fill out Appendix 1, the filer must provide detailed information about the product, including its specifications, chemical composition, physical properties, and compliance with relevant standards. Each section must be completed accurately to ensure proper evaluation.

What is the purpose of Appendix 1: Product Specification for Shared Raw Copper?

The purpose of Appendix 1 is to establish a clear framework for the reporting and assessment of shared raw copper products, facilitating transparency, quality assurance, and regulatory compliance within the industry.

What information must be reported on Appendix 1: Product Specification for Shared Raw Copper?

The report must include information such as the product name, specifications, composition, manufacturing processes, quality control measures, and any certifications or standards the product meets.