Get the free Water Well Decommissioning Program

Este documento es un formulario para la desactivación de pozos de agua, que requiere la información del propietario de la tierra y detalles sobre el pozo y el proceso de desactivación. También

How to fill out water well decommissioning program

How to fill out Water Well Decommissioning Program

1. Obtain the Water Well Decommissioning Program application form from the local government office or agency.
2. Fill in your personal details including name, address, and contact information.
3. Provide specific information about the well, such as its location, depth, and type.
4. Describe the reason for decommissioning the well, whether it is no longer in use, contaminated, or for safety reasons.
5. Include any relevant documentation or permits required by local regulations.
6. Submit the completed application form along with any required fees to the appropriate agency.
7. Await confirmation or further instructions from the agency about the decommissioning process.

Who needs Water Well Decommissioning Program?

1. Property owners with unused or contaminated wells.
2. Individuals or businesses looking to remove a well due to safety concerns.
3. Farmers or ranchers decommissioning old irrigation or livestock watering wells.
4. Real estate agents handling properties with existing wells that need to be decommissioned.

People Also Ask about

How much does it cost to seal off a well?

HOW MUCH DOES IT COST? The cost of sealing a well can vary considerably. For shallow, small diameter wells - like those found at some homes and many lake cabins — the cost typically ranges from $300 to $600. Deeper, larger wells will cost more to seal.

How to plug an abandoned water well?

Abandoned wells with diameters of 10 inches or greater usually are plugged with a combination of materials, such as sand gravel and native clay. These materials always should be shoveled into the well, as opposed to being dumped rapidly in large quantities.

How much does it cost to plug and abandon an oil well?

Current regulations require wells to be plugged with concrete to protect groundwater resources, prevent surface pollution, and stop methane emissions. This is an expensive – an average well can cost between $30,000 to $170,000 to plug – and carbon-intensive process.

How do you decommission an old well?

Grouting material, such as neat cement grout and high solids bentonite grout, must be used to decommission drilled wells. Neat cement grout is a mixture of portland cement and powdered bentonite clay. Mixing bentonite with the cement reduces the amount of shrinkage that will occur as it hardens.

How much to decommission a well?

We analyze data from up to 19,500 wells and find that median decommissioning costs are roughly $20,000 for plugging only, and $76,000 for plugging and surface reclamation. In rare cases, costs exceed $1 million per well.

How do you close an old well on your property?

The process starts with removal of the pump, the inner pipe to the pump and any material or obstructions in the well. A grout pipe is installed to the bottom of the well's borehole. The grout is pumped to fill the well from the bottom up. The grout usually consists of a special cement, clay or bentonite.

What is the process of decommissioning a well?

The Decommissioning Process: It starts with locating the dug well, which can often be hidden or forgotten. A licensed driller assesses the well's condition, including the screen and depth. Sealing the Well: Special concrete or bentonite slurry is used to seal the well. The drill and other equipment are then removed.

How much does it cost to decontaminate a well?

To gain peace of mind about the quality of your well's drinking water and have your well shock chlorinated by a professional, you can expect to pay anywhere from $80 to $200 depending on your well depth, the type of well, labor, and more.

For pdfFiller’s FAQs

What is Water Well Decommissioning Program?

The Water Well Decommissioning Program is a regulatory initiative that ensures abandoned or unused water wells are properly sealed and removed from service to prevent contamination of groundwater and protect public health.

Who is required to file Water Well Decommissioning Program?

Individuals or entities that own or manage abandoned or unused water wells are required to file the Water Well Decommissioning Program to comply with local and state regulations regarding water resources.

How to fill out Water Well Decommissioning Program?

To fill out the Water Well Decommissioning Program, one must provide accurate information about the well location, the owner details, well status, and the method of decommissioning. Specific forms may be provided by the regulatory authority.

What is the purpose of Water Well Decommissioning Program?

The purpose of the Water Well Decommissioning Program is to minimize environmental risks, protect groundwater quality, and ensure that abandoned wells do not pose a hazard to public health or safety.

What information must be reported on Water Well Decommissioning Program?

The information that must be reported includes the well's location, depth, construction details, the reason for decommissioning, and the procedures followed during the sealing process.