Get the free On‐Site Septic/Well Permit Application

This document is a permit application for on-site septic and well installation, providing guidelines, requirements, and contact information for the Pacific County Department of Community Development.

How to fill out onsite septicwell permit application

How to fill out On‐Site Septic/Well Permit Application

1. Obtain the On-Site Septic/Well Permit Application form from your local regulatory authority.
2. Fill out your personal information, including your name, address, and contact details.
3. Provide the location details of where the septic system or well will be installed.
4. Describe the type of septic system or well you are planning to install.
5. Attach any required documents, such as property maps or site plans.
6. Pay any applicable fees as indicated on the application form.
7. Review your application for accuracy and completeness before submission.
8. Submit the completed application to the local health department or appropriate authority.

Who needs On‐Site Septic/Well Permit Application?

1. Individuals or homeowners planning to install a new onsite septic system or well.
2. Property owners who are replacing an existing septic system or well.
3. Developers working on new constructions that require septic systems or wells.

People Also Ask about

What are the stages of septic system?

A traditional septic system works in a few simple steps. Wastewater flows into the septic tank, where solids settle on the bottom and floats to the top. Clarified liquid flows through an outlet pipe to a drain field. Once there, it seeps onto a bed of sand and gravel and percolates through the ground.

What are the steps of the septic system process?

How a typical conventional septic system works: All water runs out of your house from one main drainage pipe into a septic tank. The septic tank is a buried, water-tight container usually made of concrete, fiberglass, or polyethylene. The liquid wastewater (effluent) then exits the tank into the drainfield.

Can I my own septic system in VA?

Homeowners must have a permit from the local health department to construct, modify, or expand a septic system. The site must meet the standards in Virginia's Sewage Handling and Disposal Regulations before a construction permit is issued.

Can I put in my own septic system in Virginia?

Homeowners must have a permit from the local health department to construct, modify, or expand a septic system. The site must meet the standards in Virginia's Sewage Handling and Disposal Regulations before a construction permit is issued.

What is the difference between a type 1 and type 2 septic system?

Type 1: Treatment by a septic tank and dispersal field only. Type 2: Treatment that produces an effluent consistently containing less than 45 mg/L of total suspended solids and having a five-day biochemical oxygen demand of less than 45 mg/L.

What is the process of a septic tank?

How does a septic tank work? A septic tank works by collecting wastewater from your toilets and drains. It retains solids and within the tank. While some of the more resilient pollutants are biologically treated, the effluent liquid from your septic tank is driven to a drainage field.

How does a septic system work step by step?

How Does a Septic Tank Work? Wastewater Flows In. A septic tank is connected to a property by a series of pipes. Waste Settles and Separates. Bacteria Breaks Down Solids. Effluent is Clarified and Separated. Effluent Filters Through the Soil. Effluent Finishes Treatment and is Disposed.

What is the minimum distance from a house to a septic tank?

The minimum distance requirements from a house to a septic tank vary depending on the region, but, in general, septic tanks should be between 10 and 20 feet away from a home (at least). Other considerations need to be made if you are using a well or if you live near a stream, lake, road, swimming pool, or reservoir.

Do you have to be a plumber to a septic system?

Most municipalities require a licensed contractor to build a septic system, as it is a complex plumbing project that must adhere to many local codes. Licensed contractors must pass professional exams about state codes, septic tank installation requirements, construction processes, and safety considerations.

Can you put in a septic system yourself?

While it is possible to a septic system yourself, it requires a significant amount of knowledge, skill, and physical labor. Hiring a professional is often advisable to ensure compliance with regulations and to prevent costly mistakes.

For pdfFiller’s FAQs

What is On‐Site Septic/Well Permit Application?

The On-Site Septic/Well Permit Application is a formal request submitted to local health authorities to obtain permission for the installation or modification of septic systems and private wells on a property.

Who is required to file On‐Site Septic/Well Permit Application?

Property owners or developers planning to install a new septic system or well, or modify an existing one, are required to file the On-Site Septic/Well Permit Application.

How to fill out On‐Site Septic/Well Permit Application?

To fill out the application, the applicant must provide details such as property address, type of system or well, site plans, and any relevant supporting documents, along with applicable fees.

What is the purpose of On‐Site Septic/Well Permit Application?

The purpose of the application is to ensure that septic systems and wells are installed in compliance with local health and zoning regulations, thereby protecting public health and the environment.

What information must be reported on On‐Site Septic/Well Permit Application?

The application must report information including the property owner's name, property location, size of the system, type of proposed septic system or well, and any necessary engineering plans.