Get the free Lockout Tagout

The document outlines the lockout/tagout (LOTO) procedures necessary for controlling hazardous energy during servicing and maintenance of machines and equipment, detailing responsibilities, training,

How to fill out lockout tagout

How to fill out Lockout Tagout

1. Identify all energy sources for the equipment.
2. Notify all affected employees that a lockout/tagout procedure will be performed.
3. Shut down the equipment using the normal procedures.
4. Isolate the equipment from its energy sources by turning off switches or valves.
5. Lock out the energy isolating devices with appropriate locks.
6. Tag the locked devices to indicate who is responsible for the lockout and the reason for it.
7. Ensure that stored energy (such as in capacitors or springs) is dissipated or restrained.
8. Test the controls to ensure that the equipment is inoperable and no energy is present.
9. Perform necessary maintenance or repairs.
10. Remove locks and tags only when maintenance is complete and it is safe to restore the equipment to service.

Who needs Lockout Tagout?

1. All employees working with or around hazardous machinery.
2. Maintenance personnel performing repairs or servicing on equipment.
3. Supervisors and management overseeing operations involving such equipment.
4. Safety officers and compliance personnel ensuring adherence to safety regulations.

People Also Ask about

What is the meaning of lockout tagout?

Lockout tagout is a protection system against unintentional exposure to hazardous energy from equipment and machinery. A lockout device, such as a padlock, secures the energy isolating device while a tagout device (i.e. a tag) warns employees not to use the equipment.

What are the 7 steps to lockout tagout?

General steps of a lockout/tag out procedure include: Prepare for Shutdown. Notify all Affected Personnel. Equipment Shutdown. Isolation of System (De-energization) Dissipation (Removal) of Residual or Stored Energy. Lockout/Tag Out. Verify Isolation. Perform Maintenance or Service Activity.

What is meant by lockout tagout?

What is Lockout Tagout? Lockout tagout is a protection system against unintentional exposure to hazardous energy from equipment and machinery. A lockout device, such as a padlock, secures the energy isolating device while a tagout device (i.e. a tag) warns employees not to use the equipment.

What are the four 4 procedures for lockout tagout?

A lockout/tagout procedure should include the following six steps: Preparation. Shutdown. Isolation. Lockout/tagout. Stored energy check. Isolation verification.

What does OSHA say about lock out tag out?

Which are the 4 types of LOTO devices? The four common types of LOTO devices include padlocks, hasps, valve lockouts, and circuit breaker lockouts, each designed for specific types of energy isolation.

What is an example of a lockout?

Lockout or tagout device application. Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. Lockout devices, where used, shall be affixed in a manner to that will hold the energy isolating devices in a "safe" or "off" position.

For pdfFiller’s FAQs

What is Lockout Tagout?

Lockout Tagout (LOTO) is a safety procedure used to ensure that machinery is properly shut off and not able to be started up again before maintenance or servicing work is completed. This is achieved by locking devices in a safe position and tagging them to indicate that they must not be operated.

Who is required to file Lockout Tagout?

Any employee who is authorized to perform maintenance or servicing on machinery and equipment that could unexpectedly start up or release hazardous energy must adhere to the Lockout Tagout procedures. This typically includes maintenance personnel and operators.

How to fill out Lockout Tagout?

To fill out Lockout Tagout, first identify the energy sources of the equipment, then shut down the machine. Next, apply locks and tags to energy isolating devices. Afterward, complete the Lockout Tagout form with pertinent information including the date, machine details, and the person responsible for the lockout.

What is the purpose of Lockout Tagout?

The primary purpose of Lockout Tagout is to prevent accidental machinery startup and the release of hazardous energy during maintenance activities. It is a critical safety practice that protects workers from potential injuries or fatalities resulting from unexpected machine operation.

What information must be reported on Lockout Tagout?

The Lockout Tagout report should include information such as the identity of the machinery, the date and time of the lockout, the names of authorized employees involved, the type of energy sources, and any specific precautions taken to ensure safety during the maintenance process.