Get the free Annual Dry Wells Inspection Checklist - azdeq

This checklist is developed to help industrial operators monitor and inspect dry wells located in industrial areas where hazardous substances are used, stored, loaded, or treated to ensure compliance

How to fill out annual dry wells inspection

How to fill out Annual Dry Wells Inspection Checklist

1. Obtain the Annual Dry Wells Inspection Checklist form from the relevant authority or website.
2. Gather necessary tools and equipment for inspection such as a flashlight, measuring tape, and camera.
3. Inspect the location of the dry well for accessibility and safety.
4. Check for any visible damage or blockages around the dry well area.
5. Measure the depth of the dry well and record it on the checklist.
6. Inspect the inlet and outlet pipes for proper drainage and connectivity.
7. Check for signs of erosion or settling around the dry well.
8. Document any findings or issues in the designated sections of the checklist.
9. Take photographs of any concerns for future reference.
10. Review the completed checklist to ensure all sections are filled out before submission.

Who needs Annual Dry Wells Inspection Checklist?

1. Homeowners responsible for maintaining dry well systems.
2. Property managers overseeing commercial properties with dry wells.
3. Environmental consultants conducting assessments for compliance.
4. Local government agencies requiring documentation for environmental inspections.

People Also Ask about

What to do when a dry well is full?

You can do an overflow near the top of your dry well and cascade it into a second one. Or make the perfed overflow just a pitched run in another graveled ditch, away from the problem area.

How do you maintain a dry well?

Semi-annually • Remove leaves and tree debris from roof gutters. Annually • Remove and replace as necessary filter fabric, gravel, and top soil if percolation is slow. Standing water around the dry well If standing water occurs for more than 48 hours, the dry well, filter fabric or under- ground piping may be clogged.

What is the life expectancy of a dry well?

Dry wells are seen as the much more long-term solution, as they can last up to 30 years with proper care. French drains last a long time as well, but have an average lifespan closer to 10-15 years. If you want to kick this can as far down the road as possible, stick with the dry well.

What is the checklist of inspection?

An inspection checklist (sometimes called an inspection sheet) is a structured list of tasks that must be completed during an inspection. It helps ensure compliance with safety regulations, industry standards, or maintenance requirements.

How to inspect a dry well?

You can routinely check the opening of the dry well and clear away that debris to keep everything working as it should. Check for standing water: If you notice standing water, especially near your well, it may mean the well is not working properly.

Do dry wells need maintenance?

As the property owner, you are responsible for all maintenance of your dry well. An unmaintained dry well may: • Cause flooding on other areas of your property if the rainwater is not able to flow into the dry well. Cause rainwater to pool on the surface and become a breeding ground for mosquitoes and other insects.

What are the disadvantages of a dry well?

Limitations Dry wells are very difficult, if not impossible, to clean out or rehabilitate once clogged with sediment. Gravity flow dry wells are typically 30–100 feet deep, and it may be difficult to transmit recharge water to a deep aquifer due to intervening low-permeability layers.

For pdfFiller’s FAQs

What is Annual Dry Wells Inspection Checklist?

The Annual Dry Wells Inspection Checklist is a document used to systematically assess the condition and functionality of dry wells to ensure they are operating correctly and comply with environmental regulations.

Who is required to file Annual Dry Wells Inspection Checklist?

Owners or operators of dry wells, particularly those who manage facilities that generate wastewater or stormwater runoff, are generally required to file the Annual Dry Wells Inspection Checklist.

How to fill out Annual Dry Wells Inspection Checklist?

To fill out the Annual Dry Wells Inspection Checklist, users must review each section of the checklist, record observations related to the dry well's condition, functionality, and compliance, and then submit the completed form to the appropriate regulatory authority.

What is the purpose of Annual Dry Wells Inspection Checklist?

The purpose of the Annual Dry Wells Inspection Checklist is to ensure that dry wells are maintained properly, preventing potential environmental issues, such as contamination and ensuring compliance with local regulations.

What information must be reported on Annual Dry Wells Inspection Checklist?

The information reported on the Annual Dry Wells Inspection Checklist typically includes the location of the dry well, inspection date, observations regarding structural integrity, operational efficiency, any maintenance performed, and compliance with applicable regulations.