Get the free Well Plugging Contract - dmr nd

This document is a contractual agreement detailing the responsibilities and terms between a contractor and the State of North Dakota regarding the plugging of specified well sites, including terms

How to fill out well plugging contract

How to fill out Well Plugging Contract

1. Begin by entering the date of the contract at the top.
2. Fill in the names and addresses of the involved parties, including the contractor and the landowner.
3. Specify the location of the well that is to be plugged.
4. Outline the obligations of each party clearly, including who is responsible for the plugging and any related activities.
5. Include details about the materials and methods to be used for plugging the well.
6. State the timeline for the completion of the plugging work.
7. Provide terms of payment, including the total cost and payment schedule.
8. Include clauses regarding compliance with local regulations and safety standards.
9. Detail the conditions for termination of the contract by either party.
10. Both parties should sign and date the contract to make it legally binding.

Who needs Well Plugging Contract?

1. Oil and gas companies seeking to decommission wells safely.
2. Landowners who want to ensure their property is handled properly during the plugging process.
3. Regulatory agencies monitoring compliance with environmental standards.
4. Contractors specializing in well plugging services.

People Also Ask about

What does plugging a well mean?

Well plugging is done by removing the pumping system and other well obstructions, filling a well with layers of clean fill and sealing materials, removing the upper 4 feet of well casing, and removal of the well pit, pump platform, or at grade well curbing or structure.

What is well p&a?

When a well is no longer economically producing oil and natural gas, the well is evaluated for retirement and will undergo a process called 'plug and abandonment,' or P&A as it is often called.

What is permanently plugged and abandoned wells?

When a well reaches the end of its lifetime, it must be permanently plugged and abandoned. Such plug and abandonment (P&A) operations usually consist of placing several cement plugs in the wellbore to isolate the reservoir and other fluid-bearing formations.

How much does it cost to set up a well system?

Installing a new well water system ranges from $1,775 to $30,000 or more, depending on the options you choose to power your well pump and the depth and diameter of the well. Drilling is the most expensive part, followed by the cost of the pump.

How much does it cost to plug and abandon an oil well?

We analyze data from up to 19,500 wells and find that median decommissioning costs are roughly $20,000 for plugging only, and $76,000 for plugging and surface reclamation. In rare cases, costs exceed $1 million per well.

How much does it cost to plug an orphan well?

We analyze data from up to 19,500 wells and find that median decommissioning costs are roughly $20,000 for plugging only, and $76,000 for plugging and surface reclamation. In rare cases, costs exceed $1 million per well.

How to decommission an oil well?

Well abandonment involves: well entry preparations. use of a slick line unit. filling the well with fluid. removal of downhole equipment. cleaning out the wellbore. plugging open-hole and perforated intervals(s) at the bottom of the well. plugging casing stubs. plugging of annular space.

How do you plug an abandoned well?

Abandoned wells with diameters of 10 inches or greater usually are plugged with a combination of materials, such as sand gravel and native clay. These materials always should be shoveled into the well, as opposed to being dumped rapidly in large quantities.

For pdfFiller’s FAQs

What is Well Plugging Contract?

A Well Plugging Contract is a legal agreement outlining the responsibilities and procedures for properly sealing and closing a well to prevent environmental contamination and ensure safety.

Who is required to file Well Plugging Contract?

Operators or owners of wells that need to be plugged and abandoned are typically required to file a Well Plugging Contract.

How to fill out Well Plugging Contract?

To fill out a Well Plugging Contract, provide detailed information about the well, the plugging procedure, contractor details, and any regulatory compliance measures that will be followed.

What is the purpose of Well Plugging Contract?

The purpose of a Well Plugging Contract is to ensure that wells are properly decommissioned to protect public health and the environment from potential hazards related to abandoned wells.

What information must be reported on Well Plugging Contract?

Key information that must be reported includes the well's location, depth, the plugging method to be used, contractor information, and compliance with state regulations.