Get the free Pre 1987 Existing Well Declaration - berncogov

Bernalillo County Natural Resource Services 111 Union Square SE, Suite 100 Albuquerque, NM 87102 Phone (505) 3140375 Fax (505) 4629833 Office use only Permit No. NRW Reviewed by Pre-1987 Existing

How to fill out pre 1987 existing well

How to fill out pre 1987 existing well:

1. Conduct a thorough inspection of the well: Before filling out a pre 1987 existing well, it is essential to inspect it to identify any potential issues or damage. Look for signs of corrosion, leaks, or structural problems.
2. Obtain the necessary permits and approvals: Check with your local authorities or well regulatory agencies to determine if you need any permits or approvals to fill out the pre 1987 existing well. Follow the required guidelines and procedures to ensure compliance.
3. Pump out any remaining water: If there is still water in the well, use a pump or other appropriate equipment to remove it. This step is crucial to ensure the proper filling and sealing of the well.
4. Clean the well thoroughly: Remove any debris, sediments, or obstructions from the well to achieve a clean surface. This will help prevent future issues and promote effective filling.
5. Select the appropriate filling material: Choose the right filling material based on the specific regulations and recommendations for pre 1987 existing wells in your area. Common options include bentonite clay, cement, or grout. Consult with a professional or well expert if unsure.
6. Begin the filling process: Follow the instructions provided by the filling material manufacturer to begin the filling process. Generally, this involves mixing the material with water to create a paste-like consistency.
7. Fill the well gradually and uniformly: Pour the filling material into the well slowly and evenly to ensure proper distribution and prevent any air pockets. Use the appropriate tools, such as a tremie pipe or funnel, to facilitate the filling process.
8. Allow sufficient time for curing: After filling the well, give it adequate time to cure and solidify. Follow the manufacturer's recommendations for the curing period, which can vary depending on the filling material used.
9. Perform a final inspection: Once the filling material has fully cured, inspect the well again to ensure it is properly sealed and meets the required standards. This step is crucial for the well's longevity and compliance with regulations.

Who needs pre 1987 existing well?

1. Homeowners with older properties: Pre 1987 existing wells were commonly used before stricter regulations and standards were implemented. Homeowners with older properties may still have these wells on their premises and sometimes need to address them due to safety concerns or changes in regulations.
2. Professionals in the well drilling industry: Well drillers, contractors, or professionals working in the well drilling industry may come across pre 1987 existing wells while carrying out their work. They need to be knowledgeable about the requirements and proper procedures for filling out these wells.
3. Regulatory agencies and well inspectors: Authorities responsible for overseeing well drilling activities and ensuring compliance with regulations may also encounter pre 1987 existing wells during inspections. They need to be well-informed about the proper procedures and standards for filling out these wells to enforce regulatory compliance effectively.

For pdfFiller’s FAQs

What is pre 1987 existing well?

Pre 1987 existing well refers to wells that were drilled before the year 1987.

Who is required to file pre 1987 existing well?

Owners or operators of pre 1987 existing wells are required to file.

How to fill out pre 1987 existing well?

Pre 1987 existing wells must be filled out by providing all necessary information and documentation as required by the regulatory authority.

What is the purpose of pre 1987 existing well?

The purpose of filing pre 1987 existing wells is to ensure compliance with regulations and monitor the status of these wells.

What information must be reported on pre 1987 existing well?

Information such as well location, ownership, wellbore details, and production data must be reported on pre 1987 existing well.

How can I manage my pre 1987 existing well directly from Gmail?

You may use pdfFiller's Gmail add-on to change, fill out, and eSign your pre 1987 existing well as well as other documents directly in your inbox by using the pdfFiller add-on for Gmail. pdfFiller for Gmail may be found on the Google Workspace Marketplace. Use the time you would have spent dealing with your papers and eSignatures for more vital tasks instead.

How can I modify pre 1987 existing well without leaving Google Drive?

People who need to keep track of documents and fill out forms quickly can connect PDF Filler to their Google Docs account. This means that they can make, edit, and sign documents right from their Google Drive. Make your pre 1987 existing well into a fillable form that you can manage and sign from any internet-connected device with this add-on.

How do I make edits in pre 1987 existing well without leaving Chrome?

Install the pdfFiller Chrome Extension to modify, fill out, and eSign your pre 1987 existing well, which you can access right from a Google search page. Fillable documents without leaving Chrome on any internet-connected device.