Get the free Working with Copper Tubing - New Mexico State University - nmsu

Lesson A317 Working with Copper Tubing Unit A. Mechanical Systems and Technology Problem Area 3. Lesson 17. Construction Systems Working with Copper Tubing New Mexico Content Standard: Pathway Strand:

How to fill out working with copper tubing

1. Measure and cut the copper tubing: Start by measuring the area where the tubing will be installed and use a pipe cutter to cut the tubing to the required length. Make sure to wear safety goggles and gloves to protect yourself from any potential injuries.
2. Deburr the edges: After cutting the copper tubing, use a deburring tool to remove any sharp edges or burrs. This step is important to ensure a smooth connection when attaching fittings later on.
3. Clean the tubing and fittings: Before joining the copper tubing, it is crucial to clean both the tubing and fittings thoroughly. Use a dedicated wire brush or emery cloth to remove any dirt, debris, or oxidation, ensuring a proper and secure connection.
4. Apply flux: Flux is a crucial component in soldering copper tubing. Apply a thin layer of flux to the outside of the tubing and the inside of the fittings. This flux will help provide a clean surface for the solder to adhere to.
5. Assemble the fittings: Slide each fitting onto the copper tubing, ensuring they are aligned correctly and fully seated. It is essential to follow the appropriate instructions and use compatible fittings for a leak-free connection.
6. Solder the joints: Use a propane torch to heat the joint where the tubing and fittings meet. Apply heat evenly across the joint until the flux bubbles and turns a copper color. Touch the end of the solder wire to the joint, and if it starts to melt and flow smoothly, apply a thin and consistent layer of solder around the entire joint. Be cautious not to apply excessive heat to avoid damaging the tubing or fittings.
7. Cool and clean the joints: Once the solder has cooled and solidified, use a wet cloth or sponge to clean off any excess flux or solder residue. It is essential to remove these residues to prevent corrosion and ensure a neat and professional-looking finish.
8. Pressure test the system: Finally, before using the copper tubing for the intended purpose, it is advisable to conduct a pressure test. This test ensures that there are no leaks in the connections. You can use a pressure testing device or consult a professional plumber to ensure that everything is in working order.

Who needs working with copper tubing?

1. Plumbers: Plumbers often work with copper tubing to install or repair water supply lines, drain lines, and gas lines in residential, commercial, and industrial settings. They need to be skilled in working with copper tubing to ensure leak-free connections and proper installation.
2. HVAC technicians: HVAC technicians use copper tubing to install refrigerant lines for air conditioning and refrigeration systems. They need to have a good understanding of how to work with copper tubing to ensure efficient and reliable cooling systems.
3. DIY enthusiasts: Individuals who enjoy tackling DIY projects around their homes often need to work with copper tubing for various purposes, such as creating custom plumbing systems, installing outdoor sprinklers, or building homemade stills for distillation purposes. These individuals can benefit from learning the proper techniques and procedures for working with copper tubing to ensure their projects are safe and successful.

For pdfFiller’s FAQs

How can I edit working with copper tubing from Google Drive?

Using pdfFiller with Google Docs allows you to create, amend, and sign documents straight from your Google Drive. The add-on turns your working with copper tubing into a dynamic fillable form that you can manage and eSign from anywhere.

How do I edit working with copper tubing in Chrome?

Get and add pdfFiller Google Chrome Extension to your browser to edit, fill out and eSign your working with copper tubing, which you can open in the editor directly from a Google search page in just one click. Execute your fillable documents from any internet-connected device without leaving Chrome.

How do I edit working with copper tubing on an Android device?

You can edit, sign, and distribute working with copper tubing on your mobile device from anywhere using the pdfFiller mobile app for Android; all you need is an internet connection. Download the app and begin streamlining your document workflow from anywhere.

What is working with copper tubing?

Working with copper tubing involves bending, cutting, or connecting copper pipes for various plumbing or HVAC purposes.

Who is required to file working with copper tubing?

Any individual or company who performs tasks involving copper tubing in a professional setting may be required to file a report.

How to fill out working with copper tubing?

To fill out a report on working with copper tubing, provide detailed information about the tasks performed, materials used, and any relevant safety precautions taken.

What is the purpose of working with copper tubing?

The purpose of working with copper tubing is to create a reliable and durable plumbing or HVAC system.

What information must be reported on working with copper tubing?

The report on working with copper tubing must include details on the specific tasks performed, materials used, any potential hazards encountered, and any safety measures taken.