Get the free Lockout Tagout Plan - des umd

This document outlines the Lockout/Tagout Plan established to protect University employees from hazards caused by the inadvertent activation of equipment during maintenance, in compliance with OSHA

How to fill out lockout tagout plan

How to fill out Lockout Tagout Plan

1. Identify all equipment that requires lockout/tagout procedures.
2. Determine and document the specific energy sources for each piece of equipment.
3. Inform all affected employees about the impending lockout/tagout procedures.
4. Prepare the lockout/tagout devices, such as locks and tags.
5. Shut down the equipment following the manufacturer's instructions.
6. Isolate the energy sources and ensure that they are in a safe position.
7. Apply lockout/tagout devices in a way that prevents accidental re-energization.
8. Verify that the equipment is completely shut down and incapable of being operated.

Who needs Lockout Tagout Plan?

1. All employees working with or around machinery and equipment.
2. Supervisors and managers overseeing operations where lockout/tagout is necessary.
3. Maintenance personnel performing repairs or servicing on equipment.
4. Contractors and outside personnel who may work on equipment requiring lockout/tagout.

People Also Ask about

What is a lockout tagout plan?

Lockout/Tagout (LO/TO) protects workers by keeping equipment off and still while working on it. Many LOTO procedures are more complex than the basic process listed below: Tell people who could be affected. The worker turns off the equipment. Attach a device that prevents it from being activated or releasing energy.

What are the 7 steps of lockout tagout?

General steps of a lockout/tag out procedure include: Prepare for Shutdown. Notify all Affected Personnel. Equipment Shutdown. Isolation of System (De-energization) Dissipation (Removal) of Residual or Stored Energy. Lockout/Tag Out. Verify Isolation. Perform Maintenance or Service Activity.

What are the 8 steps of LOTO?

8 Steps of Lockout-Tagout (LOTO) Procedure Preparation. Notification & Shutdown. Isolation. Lockout-Tagout. Secure or Release Stored Energy. Isolation Verification. Maintaining Lockout During Service. Putting the Equipment Back into Service.

How to write a lockout tag out procedure?

8 Steps of a lockout tagout procedure Step 1: Notify affected employees. Step 2: Identify procedure and hazards. Step 3: Shut down. Step 4: Isolate machine from energy source. Step 5: Apply lockout tagout devices. Step 6: Check stored energy. Step 7: Verify Isolation, Tryout and Test. Step 8: Bring equipment back on line.

What are the 7 steps to perform a LOTO?

How LOTO Works. #1: Notify Employees. #2: Identify Energy Sources. #3: Shut Down Equipment. #4: Deactivate Energy Isolating Devices. #5: Apply Applicable LOTO Devices. #6: Dissipate Stored Energy. #7: Verify Energy Isolation.

What should be written on a lockout tag?

Must warn against hazardous conditions if the machine or equipment is energized [29 CFR 1910.147(c)(5)(iii)]. Must include a legend such as: Do Not Start, Do Not Open, Do Not Close, Do Not Energize, Do Not Operate [29 CFR 1910.147(c)(5)(iii)].

How to write a LOTO procedure?

Tips for Writing Better LOTO Procedures Clearly Define Safety Equipment. Identify LOTO Devices with Visuals. Use Direct and Concise Wording. Record Verification Methods. Include Troubleshooting Information. Use Modern Tools to Notify Affected Employees.

What is the correct statement for LOTO?

Lockout/tagout (LOTO) is only a suggested precaution and NOT a requirement that must be adhered to. LOTO procedures are an OSHA requirement and must be adhered to when perform any maintenance or repairs on electrical equipment.

For pdfFiller’s FAQs

What is Lockout Tagout Plan?

A Lockout Tagout Plan is a safety procedure used in industrial settings that ensures that machines or equipment are properly shut off and not able to start up again before maintenance or servicing is completed.

Who is required to file Lockout Tagout Plan?

Employers are required to implement and file a Lockout Tagout Plan for all employees who are authorized to service or maintain equipment and for any employees who may be affected by such maintenance.

How to fill out Lockout Tagout Plan?

To fill out a Lockout Tagout Plan, one must identify the energy sources for the equipment, establish procedures for isolating those energy sources, and ensure that all personnel are aware of these procedures and trained in their implementation.

What is the purpose of Lockout Tagout Plan?

The purpose of a Lockout Tagout Plan is to prevent accidental equipment startup and ensure the safety of workers during maintenance activities by controlling hazardous energy.

What information must be reported on Lockout Tagout Plan?

The Lockout Tagout Plan must report information such as the equipment identification, types of hazardous energy, lockout/tagout procedures, the individuals responsible for lockout/tagout, and any training records related to the plan.