Get the free ON-SITE WASTEWATER SYSTEM PERCOLATION TEST

PLANNING DEPARTMENT 130 KANSAS CITY STREET, SUITE 200 RAPID CITY, SD 57701 6053942186 FAX 6053946016 www.pennco.org/wastewater ONSITE WASTEWATER SYSTEM ...

How to fill out on-site wastewater system percolation

1. On-site wastewater system percolation, also known as a percolation test or a perc test, is typically required for individuals who are planning to install a septic system or a similar type of on-site wastewater treatment system.
2. Homeowners who are building a new house or planning to make significant modifications to their existing septic system usually need to fill out a percolation test to determine if their property's soil is suitable for proper wastewater treatment and disposal.
3. The first step in filling out a percolation test is to contact your local health department or environmental agency to inquire about the specific requirements and regulations in your area. They will provide you with the necessary forms and instructions.
4. Before starting the test, it is important to locate the proposed area for the septic system. This area should be away from any water sources such as wells, lakes, or streams, and should have sufficient space for the required drainage field.
5. The next step is to dig holes in the designated area where the percolation test will be conducted. These holes are typically 6 to 12 inches in diameter and are dug to a depth of about 2 feet below the proposed drain field or infiltration area.
6. Once the holes are dug, you will need to fill them with water, allowing them to completely saturate the soil. This process usually involves pouring water into the holes multiple times over a period of 24 hours.
7. After the saturation period, the water level in each hole should be marked and monitored over the next several hours. The rate at which the water level drops in each hole is an indicator of the soil's ability to accept and drain wastewater.
8. The overall percolation rate is usually calculated by measuring the average drop in water level over a specified time interval, typically measured in minutes. This information is then used to determine the size and design of the septic system's drain field or infiltration area.
9. It is important to follow the instructions provided by your local health department or environmental agency when filling out the percolation test form. This may include recording specific measurements, noting the soil type, and providing additional documentation or permits.
10. Once you have completed the percolation test and filled out the necessary forms, submit them to the relevant agency for review and approval. They will assess whether your property's soil is suitable for a septic system installation and provide further guidance if needed.

Overall, anyone planning to install an on-site wastewater system, such as a septic system, should be familiar with the process of filling out a percolation test. By following the appropriate steps and guidelines, individuals can ensure that their septic system functions effectively and minimizes potential environmental impacts.

For pdfFiller’s FAQs

What is on-site wastewater system percolation?

On-site wastewater system percolation involves the ability of the soil to absorb and filter wastewater as it percolates through the ground.

Who is required to file on-site wastewater system percolation?

Property owners or homeowners who have on-site wastewater systems are required to file percolation tests or reports.

How to fill out on-site wastewater system percolation?

To fill out on-site wastewater system percolation, you need to conduct a percolation test on the soil and submit a report detailing the results.

What is the purpose of on-site wastewater system percolation?

The purpose of on-site wastewater system percolation is to ensure that the soil is suitable for wastewater absorption and treatment to protect the environment and public health.

What information must be reported on on-site wastewater system percolation?

The report must include details of the percolation test method, soil characteristics, water table depth, and the percolation rate.

How can I modify on-site wastewater system percolation without leaving Google Drive?

pdfFiller and Google Docs can be used together to make your documents easier to work with and to make fillable forms right in your Google Drive. The integration will let you make, change, and sign documents, like on-site wastewater system percolation, without leaving Google Drive. Add pdfFiller's features to Google Drive, and you'll be able to do more with your paperwork on any internet-connected device.

How can I send on-site wastewater system percolation for eSignature?

When you're ready to share your on-site wastewater system percolation, you can swiftly email it to others and receive the eSigned document back. You may send your PDF through email, fax, text message, or USPS mail, or you can notarize it online. All of this may be done without ever leaving your account.

How do I fill out on-site wastewater system percolation using my mobile device?

Use the pdfFiller mobile app to complete and sign on-site wastewater system percolation on your mobile device. Visit our web page (https://edit-pdf-ios-android.pdffiller.com/) to learn more about our mobile applications, the capabilities you’ll have access to, and the steps to take to get up and running.