Get the free Model Stormwater Management Ordinance

This document outlines the Model Stormwater Management Ordinance for municipalities in Adams County, Pennsylvania, detailing regulations, definitions, and requirements for stormwater management activities.

How to fill out model stormwater management ordinance

How to fill out Model Stormwater Management Ordinance

1. Start with the title page indicating 'Stormwater Management Ordinance'.
2. Define the purpose and objectives of the ordinance.
3. Specify the legal authority under which the ordinance is enacted.
4. Describe the geographic area the ordinance will cover.
5. Outline definitions and key terms related to stormwater management.
6. Establish regulations for stormwater management practices and facilities.
7. Include provisions for permits and approval processes.
8. Detail compliance requirements and maintenance responsibilities.
9. Incorporate inspection and enforcement procedures.
10. Provide for public education and outreach on stormwater issues.
11. Specify penalties for non-compliance.
12. Include provisions for amendments and future updates to the ordinance.

Who needs Model Stormwater Management Ordinance?

1. Local government agencies responsible for land use and development.
2. Environmental protection organizations concerned with water quality.
3. Developers and builders needing to comply with stormwater regulations.
4. Community members who are affected by stormwater management issues.
5. Urban planners and engineers involved in infrastructure design.

People Also Ask about

What is a BMP inspection?

We inspect and maintain all types of Stormwater Best Management Practices (BMPs) – with the goal of making sure these facilities remain in compliance with local stormwater regulations.

Which of the following is an example of a stormwater BMP?

Examples of Treatment Control BMPs include vegetated swales, infiltration trenches, detention/retention basins, catch basin filters, and vortex separators. These devices help remove potential pollutants from runoff prior to leaving site and entering storm drain system and our lake.

What is a BMP for stormwater?

Individual stormwater permits usually cost anywhere from a few hundred dollars to upwards of $5,000+. Individual stormwater permits typically grant you a little more freedom since they will be tailored specifically to your operation and its stormwater (and sometimes process water) discharge needs.

What does BMP stand for in water treatment?

BMP stands for Best Management Practice. Storm water management BMPs are control measures taken to mitigate changes to both quantity and quality of urban runoff caused through changes to land use.

What is the storm water management model?

EPA's Storm Water Management Model (SWMM) is used throughout the world for decision support, emergency response, planning, analysis, and design related to stormwater, combined, and sanitary sewer systems as well as for other drainage systems.

What does BMP stand for?

A basic metabolic panel (BMP) measures eight different substances in your blood. It provides important information about your body's fluid balance, your metabolism (the process your body uses to make energy from food you eat), and how well your kidneys are working. This test is often used to check your general health.

How much does a stormwater management plan cost?

1:33 5:54 C is the runoff coefficient. This is essentially the percentage of water that runs off of a givenMoreC is the runoff coefficient. This is essentially the percentage of water that runs off of a given surface. For example if rain is falling at 2 in per hour.

For pdfFiller’s FAQs

What is Model Stormwater Management Ordinance?

The Model Stormwater Management Ordinance is a legislative framework designed to regulate the management of stormwater runoff to protect water quality and reduce flooding.

Who is required to file Model Stormwater Management Ordinance?

Entities such as municipalities, developers, and construction site operators that manage stormwater in their projects are typically required to file the Model Stormwater Management Ordinance.

How to fill out Model Stormwater Management Ordinance?

To fill out the Model Stormwater Management Ordinance, applicants must provide detailed project information, including plans for stormwater management practices, an assessment of potential impacts, and compliance strategies with relevant regulations.

What is the purpose of Model Stormwater Management Ordinance?

The purpose of the Model Stormwater Management Ordinance is to implement effective stormwater management practices that minimize pollution, prevent flooding, and protect natural waterways.

What information must be reported on Model Stormwater Management Ordinance?

The information that must be reported typically includes project details, best management practices (BMP) employed, stormwater calculations, maintenance plans, and compliance with local and state regulations.