Get the free Shallow Well Registration

This document is intended for the registration of shallow wells in the City of Cedar Springs, detailing requirements and regulations to prevent cross connection with the water supply system.

How to fill out shallow well registration

How to fill out Shallow Well Registration

1. Obtain the Shallow Well Registration form from your local water authority or website.
2. Fill in your personal information including name, address, and contact details.
3. Provide the location details of the well including latitude and longitude coordinates.
4. Specify the intended use of the well, such as irrigation or domestic use.
5. Indicate the depth of the well and the type of construction used.
6. Include any additional information requested by the form, such as nearby water bodies or environmental concerns.
7. Review the filled form for accuracy and completeness.
8. Submit the form to the designated authority, either online or in person.

Who needs Shallow Well Registration?

1. Individuals or households planning to construct a shallow well for personal use.
2. Farmers needing water access for irrigation purposes.
3. Businesses relying on groundwater for operations.
4. Any entity required to comply with local regulations regarding groundwater extraction.

People Also Ask about

Can you dig your own shallow well?

Technically, yes. Assuming you have no local laws prohibiting such, you can dig your own well.

How to inspect a shallow well?

0:05 1:15 And that the connections are watertight. You don't want surface water dirt mice or bugs to get intoMoreAnd that the connections are watertight. You don't want surface water dirt mice or bugs to get into your wellwater. And contaminate your drinking. Water.

How to check if a well is good?

0:03 1:15 And that the connections are watertight. You don't want surface water dirt mice or bugs to get intoMoreAnd that the connections are watertight. You don't want surface water dirt mice or bugs to get into your wellwater. And contaminate your drinking. Water.

How to identify a shallow well?

Shallow wells will have a pump that is above ground, which allows for easier well maintenance but is obviously visible. Deep wells often have a submersible well pump that could be several hundred feet deep.

How do I know if my well is shallow or deep?

Deep wells are characterized by their substantial depth, typically exceeding 100 feet (30 meters) or more below the Earth's surface. Shallow wells, in contrast, tap into water sources relatively close to the surface, usually at depths of less than 100 feet (30 meters).

How do you test the depth of a well?

Tape or Cord Measure. A simple, reliable, accurate, and low cost method to measure depth to water in a well, is by using an ordinary tape measure. One marked with feet, tenths, and hundredths of feet is ideal.

How to measure a shallow well?

You can measure the depth of water by lowering a wetted steel tape to into the well until the lower part of the tape is under water. A chalk coating on the last few feet of tape indicates the exact water level.

What is considered a shallow well?

Shallow wells have an average depth of under 50 feet. Most deep wells are between 100 and 1,000 feet deep. Deep wells have better filtration but may have higher mineral and radioactive elements. Shallow wells are less costly to dig and maintain.

For pdfFiller’s FAQs

What is Shallow Well Registration?

Shallow Well Registration is a process by which individuals or entities must formally register their shallow wells with the relevant authorities to ensure compliance with local regulations and water management practices.

Who is required to file Shallow Well Registration?

Individuals or entities that own or operate shallow wells used for purposes such as irrigation, agriculture, or potable water supply are typically required to file Shallow Well Registration.

How to fill out Shallow Well Registration?

To fill out Shallow Well Registration, applicants must obtain the registration form from the appropriate regulatory agency, provide required details such as well location, depth, purpose, and ownership, and submit the completed form along with any applicable fees.

What is the purpose of Shallow Well Registration?

The purpose of Shallow Well Registration is to manage and regulate water resources effectively, protect groundwater quality, and ensure sustainable water use while maintaining compliance with applicable laws.

What information must be reported on Shallow Well Registration?

Information that must be reported typically includes the well's location (coordinates), depth, construction details, purpose of use, estimated water extraction rates, and the owner's contact information.