Get the free Annual Directional Bore 2010

This document serves as a bid solicitation for the construction of various electric distribution projects, including directional boring and installation of conduits, to be performed by contractors.

How to fill out annual directional bore 2010

How to fill out Annual Directional Bore 2010

1. Gather all necessary data related to the directional bore project.
2. Obtain a copy of the Annual Directional Bore 2010 form.
3. Fill out the project identification section with accurate details.
4. Provide a summary of the bore method used in the project.
5. Document the start and end dates of the directional bore operations.
6. Include detailed information about the bore path, including depth and angle.
7. Record any unexpected challenges or issues encountered during the bore.
8. Attach any relevant maps or diagrams that visually represent the bore path.
9. Review the form for completeness and accuracy.
10. Submit the filled-out form to the appropriate regulatory authority by the required deadline.

Who needs Annual Directional Bore 2010?

1. Civil engineers and contractors involved in directional drilling projects.
2. Environmental regulatory agencies that monitor drilling activities.
3. Project managers overseeing infrastructure development.
4. Companies that perform maintenance on existing bore installations.
5. Stakeholders interested in the impact of directional drilling on local environments.

People Also Ask about

What is the difference between HDD and HDB?

Horizontal Directional Bores use Horizontal Directional Drilling (HDD) technology with the notable difference in HDB being no curvature in the bore. To complete a HDB, a drill rig is set up on one side of the crossing and advances lengths of drill rod through the crossing to create a small borehole (pilot shot).

When did directional boring start?

As a utility installer in Los Angeles in the early 1960s, Cherrington came up with the concept of horizontal directional drilling. While on the job, he saw another business installing a gas line nearby using a hand-held air drill. When Cherrington learned about guided drilling, he was inspired to research the subject.

How much does a bore cost?

The deeper the bore the more it costs to . But on average it ranges from around $2,500.00-$5,000.00 start to finish including all necessary work.

How much does a directional bore cost?

How much does Directional boring cost? Directional boring typically cost between $25-$50 Per linear foot. It is important to remember cost can vary highly depending on the job.

How long can you directional bore?

Maximum lengths and hole diameters are determined by project specific geotechnical conditions however effective outside range for heavy rig horizontal directional drilling is 3,000 m (9,843 ft). Light rigs are typically used for crossings between 50 m and 1,000 m (164 ft – 3,281 ft).

How much does directional drilling cost vs trenching?

Cost is often a significant factor in choosing between trenching and boring. While exact prices can vary based on location and project specifics, here's a general comparison according to Angi and HomeGuide: Trenching: $5 – $12 per linear foot. Directional Boring: $10 – $30 per linear foot.

How much does directional bore cost?

Directional boring costs $10 to $30 per linear foot or $1,000 to $9,000 total on average. Underground directional boring or horizontal directional drilling prices depend on the location and ground conditions. Drilling through rock or under a driveway costs more than soft soil or small residential projects.

For pdfFiller’s FAQs

What is Annual Directional Bore 2010?

The Annual Directional Bore 2010 is a reporting document used to provide information about directional boring activities conducted by certain entities during the specified year.

Who is required to file Annual Directional Bore 2010?

Entities engaged in directional drilling or boring operations, typically including contractors, utility companies, and other organizations involved in underground excavation, are required to file the Annual Directional Bore 2010.

How to fill out Annual Directional Bore 2010?

To fill out the Annual Directional Bore 2010, the filer should gather relevant data regarding their directional boring activities, including locations, depths, volumes, and any related environmental impacts, and then complete the form according to the guidelines provided by the regulatory authority.

What is the purpose of Annual Directional Bore 2010?

The purpose of the Annual Directional Bore 2010 is to monitor and regulate directional boring activities, ensuring compliance with environmental standards and safety regulations while collecting data for future planning and resource management.

What information must be reported on Annual Directional Bore 2010?

Information that must be reported on Annual Directional Bore 2010 includes the locations of boreholes, the depth of drilling, types of materials used, the purpose of the boring activities, any incidents or issues encountered, and a summary of environmental impact assessments.