Get the free SOIL PERCOLATION TEST DATA - Putnam County Online

PUTNAM COUNTY DEPARTMENT OF HEALTH DIVISION OF ENVIRONMENTAL HEALTH SERVICES DESIGN DATA SHEET SUBSURFACE SEWAGE TREATMENT SYSTEM Owner Address Located at (Street) Tax Map Block Lot (indicate the

How to fill out soil percolation test data

How to fill out soil percolation test data:

1. Collect all the necessary equipment such as a soil auger, measuring tape, stopwatch, and a container to collect the soil samples.
2. Choose the location for the percolation test, ensuring it is representative of the area you want to assess.
3. Begin by digging a hole in the selected location using the soil auger. The hole should be at least 6 to 8 inches in diameter and must reach the depth of the proposed absorption area.
4. Remove any debris or rocks from the hole to ensure accurate results.
5. Measure and record the depth of the hole using a measuring tape.
6. Fill the hole with water and allow it to drain completely. This will saturate the soil and prepare it for testing.
7. Carefully measure and record the initial water level in the hole. This will serve as the starting point for the percolation test.
8. Mark the starting water level on the container used for measurement to ensure accurate readings.
9. Begin the percolation test by pouring a specific volume of water (usually between 6 and 12 inches) into the hole and start the stopwatch.
10. Observe and measure the drop in water level at regular intervals (often every 30 minutes) until the water level stops dropping or reaches a predetermined cut-off point.
11. Record every measurement accurately, including the elapsed time and the corresponding water level.
12. Repeat the percolation test at least two more times in different locations within the proposed absorption area to ensure reliable results.
13. Calculate the average percolation rate by dividing the depth of water absorbed (in inches) by the total elapsed time (in minutes) for each test.
14. Finally, compile all the collected data into a soil percolation test report, including the location, depth of the holes, water levels, elapsed time, and calculated percolation rates.

Who needs soil percolation test data:

1. Agencies responsible for approving septic system permits need soil percolation test data to assess if the soil is suitable for wastewater absorption.
2. Engineers and designers involved in construction projects, particularly those related to septic systems or drainage systems, rely on soil percolation test data to ensure the proper design and functioning of the systems.
3. Property owners and potential buyers who are planning to build or purchase properties with septic systems need soil percolation test data to evaluate the suitability of the soil for wastewater absorption and system installation.

For pdfFiller’s FAQs

How can I send soil percolation test data to be eSigned by others?

Once you are ready to share your soil percolation test data, you can easily send it to others and get the eSigned document back just as quickly. Share your PDF by email, fax, text message, or USPS mail, or notarize it online. You can do all of this without ever leaving your account.

How do I execute soil percolation test data online?

Easy online soil percolation test data completion using pdfFiller. Also, it allows you to legally eSign your form and change original PDF material. Create a free account and manage documents online.

Can I edit soil percolation test data on an iOS device?

Yes, you can. With the pdfFiller mobile app, you can instantly edit, share, and sign soil percolation test data on your iOS device. Get it at the Apple Store and install it in seconds. The application is free, but you will have to create an account to purchase a subscription or activate a free trial.

What is soil percolation test data?

Soil percolation test data refers to the results obtained from conducting a test to measure the rate at which water drains through soil.

Who is required to file soil percolation test data?

Individuals or organizations involved in construction projects that require information about soil drainage capabilities are typically required to file soil percolation test data.

How to fill out soil percolation test data?

To fill out soil percolation test data, you need to measure the time it takes for a certain volume of water to percolate through the soil and record this information accurately on the provided form.

What is the purpose of soil percolation test data?

The purpose of soil percolation test data is to assess the drainage capabilities of the soil, which is critical for various applications like designing septic systems or determining the suitability of construction sites.

What information must be reported on soil percolation test data?

Typically, soil percolation test data should include the location of the test, date and time of the test, measurements of the water volume and percolation time, as well as any relevant remarks or observations.