Get the free 22404 STREET SWAY BAR SET

This document provides detailed installation instructions for the Hotchkis front and rear sway bar set specifically designed for the 2002 and up Acura RSX, along with information about warranty policies

How to fill out 22404 street sway bar

How to fill out 22404 STREET SWAY BAR SET

1. Gather all necessary tools and parts included in the 22404 STREET SWAY BAR SET.
2. Park the vehicle on a level surface and engage the parking brake.
3. Lift the vehicle using a jack and secure it with jack stands.
4. Locate the factory sway bar in the vehicle's suspension system.
5. Remove the existing sway bar by unbolting it from the mounting points.
6. Install the new sway bar by aligning it with the mounting points.
7. Securely bolt the sway bar in place, ensuring all connections are tight.
8. Reattach any components that were removed to access the sway bar.
9. Lower the vehicle back to the ground.
10. Test drive the vehicle to ensure proper installation and alignment.

Who needs 22404 STREET SWAY BAR SET?

1. Car enthusiasts looking to improve vehicle handling.
2. Individuals aiming to enhance performance for racing or off-roading.
3. Owners of vehicles that experience body roll during cornering.
4. Mechanics and automotive professionals specializing in suspension upgrades.

People Also Ask about

Are thicker sway bars better?

Increasing the thickness of both bars is usually one of the best paths forward for increased grip. It's likely that a thicker front bar, in conjunction with the current thicker rear bar, will yield a setup that is balanced under cornering and has better body motion control.

What does upgrading a sway bar do?

Many cars from the factory are tuned to understeer at the limit for safety reasons. A stiffer front sway bar helps manage how the front end loads up during corner entry and mid-corner, allowing for more precise control.

Does a thicker sway bar make a difference?

In general, a larger rear sway bar will increase oversteer, while a larger front sway bar will increase understeer. This is because a larger sway bar limits the car's roll, thereby increasing friction on the tires and making it more prone to under/oversteer.

What is the purpose of sway bars?

Answer: Sway bars, also called stabilizer bars, are used to keep your vehicle from rolling over. It is a U-shaped steel bar that is connected to each of the vehicle's front wheels. When your vehicle goes around a turn, your vehicle's body rolls to one side, or its weight shifts to one side.

What do stiffer sway bars do?

Stiffer sway bars make cars more responsive in corners, whereas softer sway bars do the opposite. It's the easiest and simplest way to make a perceivable change to the balance and dynamics of any car. Sway bars are usually affordable and easy to , making this a must-do mod for anyone looking to tune a car.

Do sway bars really make a difference?

9:46 11:21 And just immediately transfers to the inside suspension. And you just. Feel. You feel a a directnessMoreAnd just immediately transfers to the inside suspension. And you just. Feel. You feel a a directness. That was not there. Before. This is how the Miata should have felt from the factory.

How do I tell what size sway bar I have?

0:08 1:37 Correct. What you want to do when you measure a sway bar is always measure in a straight segmentMoreCorrect. What you want to do when you measure a sway bar is always measure in a straight segment never measure it on curves or at ends. The material is distorted at this point.

How should a sway bar sit?

2:03 6:40 Basically what you're looking for is you want to get these as tight as possible. But you still wantMoreBasically what you're looking for is you want to get these as tight as possible. But you still want a little bit of movement. If </S> If you go too tight you're going to have a bind.

For pdfFiller’s FAQs

What is 22404 STREET SWAY BAR SET?

The 22404 STREET SWAY BAR SET is a specific automotive part designed to enhance vehicle stability and handling by reducing body roll during turns.

Who is required to file 22404 STREET SWAY BAR SET?

Typically, automotive manufacturers or repair shops are required to file related documentation for parts like the 22404 STREET SWAY BAR SET to ensure compliance with safety and quality regulations.

How to fill out 22404 STREET SWAY BAR SET?

To fill out the 22404 STREET SWAY BAR SET form, one must provide details such as the part number, vehicle compatibility, installation guidelines, and any applicable safety certifications.

What is the purpose of 22404 STREET SWAY BAR SET?

The purpose of the 22404 STREET SWAY BAR SET is to improve vehicle handling by minimizing body roll, thereby enhancing the overall driving experience, comfort, and safety.

What information must be reported on 22404 STREET SWAY BAR SET?

Information reported on the 22404 STREET SWAY BAR SET includes the manufacturer details, part specifications, compliance with safety standards, installation recommendations, and any warranty terms.