Get the free 2010 Prescriptive Lighting Application

This document outlines the application process and requirements for obtaining incentives for energy-efficient lighting projects in New Jersey.

How to fill out 2010 prescriptive lighting application

How to fill out 2010 Prescriptive Lighting Application

1. Gather necessary documentation such as building plans and existing lighting specifications.
2. Download the 2010 Prescriptive Lighting Application form from the relevant authority's website.
3. Fill out the applicant information section, including name, address, and contact details.
4. Detail the existing lighting conditions including wattage and type of fixtures currently installed.
5. Provide information on the proposed lighting design, including fixture types, wattages, and layout.
6. Calculate the total wattage for the proposed lighting scheme.
7. Ensure compliance with the relevant lighting standards and regulations.
8. Review the application for accuracy and completeness.
9. Submit the completed application form along with any required supplementary documents to the appropriate agency.

Who needs 2010 Prescriptive Lighting Application?

1. Building owners and developers aiming to comply with municipal lighting regulations.
2. Architects and lighting designers who need to ensure their designs meet specific prescriptive standards.
3. Contractors and electricians involved in installing lighting systems to comply with code requirements.
4. Regulatory bodies monitoring adherence to lighting guidelines.

People Also Ask about

What is the power allowance for Title 24 lighting?

The Lighting Power Allowance (LPA) is the maximum allowed watts per square foot. In California's Title 24, the LPA is being reduced from . 65 to . 6 watts per square foot in 2023.

What is lighting power density in Title 24?

Lighting power density (LPD) is a big part of Title 24 lighting compliance in commercial applications. Defined as "the total rated wattage of lighting fixtures used in a building or space per square foot," LPD essentially designates specific wattage allowances to specific spaces throughout a building.

What is the new lighting legislation?

Energy Related Products (ERP) must be compliant to their respective efficiency regulations – for lighting – if it's in scope – that's the SLR. As of 1st September, 2021, ONLY SLR compliant products can be placed on the market, or if already placed on the market they may continue to be saleable.

What is the power density of lighting?

In simple terms, LPD refers to the amount of electrical power used for lighting per square foot or square meter of space. It might sound a bit technical, but it is essential for meeting energy regulations and lowering our carbon footprint.

What is prescriptive lighting?

Prescriptive Lighting Program This program is for customers who have identified lighting improvement projects and have procured cost quotations from licensed installers. Incentives available through the Prescriptive Lighting Program are based upon equipment eligibility and pre-determined incentive per unit.

What are the applications of lighting control system?

Lighting control systems do more than illuminate homes, hotels and offices. They can boost productivity, save money, lower carbon emissions, respond to occupants, complement design and enhance the usability of a building.

What are Title 24 lighting requirements?

Title 24 mandates an automatic control apparatus that curbs or switches off the lighting when a space is empty or not in use. An automatic shut-off control could be a time clock, an occupancy sensor, or any other device capable of automating the lighting system.

What is the power density allowance for lighting?

Lighting Power Density technically represents the load of any lighting equipment in any defined area, or the watts per square foot of the lighting equipment. However, in the lighting industry it is often associated with the lighting power allowance (LPA) permitted by the building energy code in question.

For pdfFiller’s FAQs

What is 2010 Prescriptive Lighting Application?

The 2010 Prescriptive Lighting Application is a regulatory document used to comply with specific lighting standards and efficiency measures mandated by energy codes, ensuring that lighting systems installed in buildings meet specified performance criteria.

Who is required to file 2010 Prescriptive Lighting Application?

Contractors, builders, and building owners who are installing new lighting systems or making significant upgrades to existing systems in compliance with energy efficiency regulations are required to file the 2010 Prescriptive Lighting Application.

How to fill out 2010 Prescriptive Lighting Application?

To fill out the 2010 Prescriptive Lighting Application, individuals must provide detailed information regarding the lighting project, including specifications for fixtures, wattage, energy-saving measures, and overall compliance with energy codes, ensuring accurate documentation and calculations are included.

What is the purpose of 2010 Prescriptive Lighting Application?

The purpose of the 2010 Prescriptive Lighting Application is to promote energy efficiency in lighting systems, reduce energy consumption, comply with local codes, and provide documentation that verifies adherence to energy performance standards.

What information must be reported on 2010 Prescriptive Lighting Application?

The information that must be reported on the 2010 Prescriptive Lighting Application includes project details, types of lighting fixtures being used, total wattage, energy-saving features, compliance measures with energy codes, and any other relevant specifications that demonstrate adherence to the prescriptive requirements.