Get the free HES-210 Walking and Working Surfaces

This document outlines the procedures and requirements for maintaining safe walking and working surfaces within Chevron Pipe Line Company operations, as well as associated roles, responsibilities,

How to fill out hes-210 walking and working

How to fill out HES-210 Walking and Working Surfaces

1. Obtain the HES-210 form from the relevant authority or website.
2. Read the instructions carefully before beginning to fill it out.
3. Fill in your personal details including name, address, and contact information.
4. Provide the relevant details regarding the walking and working surfaces, including any hazards present.
5. Indicate the types of activities being conducted on the surfaces.
6. List any safety measures or protective equipment being used.
7. Review the completed form for accuracy and completeness.
8. Submit the form as per the instructions provided.

Who needs HES-210 Walking and Working Surfaces?

1. Employers with employees working on walking and working surfaces.
2. Safety officers responsible for workplace health and safety.
3. Compliance officers conducting inspections.
4. Employees who need to understand safety protocols on such surfaces.

People Also Ask about

What is the OSHA standard for walking-working surfaces?

Walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice. Loads. The employer must ensure that each walking-working surface can support the maximum intended load for that surface. Access and egress.

What is an example of a fall protection measure on walking-working surfaces?

As a general matter, each worker on a walking or working surface 6 feet or more above a lower level must be protected from falling by a guardrail system, a safety net system, or a personal fall arrest system.

What is the OSHA gap for walking-working surfaces?

OSHA's construction fall protection rule, 29 CFR Subpart M §1926.500, defines these terms as follows: "Hole means a gap or void 2 inches (5.1 cm) or more in its least dimension, in a floor, roof, or other walking/working surface."

What is a walking-working surface?

Walking-working surface means any horizontal or vertical surface on or through which an employee walks, works, or gains access to a work area or workplace location.

What does OSHA say about walking and working surfaces?

The employer must ensure that each walking-working surface can support the maximum intended load for that surface. Access and egress. The employer must provide, and ensure each employee uses, a safe means of access and egress to and from walking-working surfaces.

For pdfFiller’s FAQs

What is HES-210 Walking and Working Surfaces?

HES-210 Walking and Working Surfaces is a form used to report hazards related to walking and working surfaces in occupational settings, ensuring safety standards are met.

Who is required to file HES-210 Walking and Working Surfaces?

Employers in various industries must file HES-210 if their employees work on walking and working surfaces that pose potential hazards.

How to fill out HES-210 Walking and Working Surfaces?

To fill out HES-210, complete the required fields detailing the specific walking and working surfaces, hazard assessments, and any safety measures taken.

What is the purpose of HES-210 Walking and Working Surfaces?

The purpose of HES-210 is to ensure that employers identify and mitigate hazards on walking and working surfaces, thus enhancing worker safety and compliance.

What information must be reported on HES-210 Walking and Working Surfaces?

Information that must be reported includes the type of surfaces, identified hazards, safety protocols, and any corrective actions taken to address risks.