TSP-3 2011 free printable template

This Designation of Beneficiary form will stay in effect until you submit another valid Form TSP-3 or you cancel it. A witness must be age 21 or older. Form TSP-3 5/2013 PREVIOUS EDITIONS OBSOLETE THRIFT SAVINGS PLAN TSP-3 DESIGNATION OF BENEFICIARY This form is designed to be read by an optical scanner. Witnesses who signed Page 1 must also sign and date each additional page. Note If a named beneficiary dies you may prefer to submit another Form TSP-3 to change your designation s. If you...

How to fill out TSP-3

How to fill out TSP-3

1. Obtain a TSP-3 form from the TSP website or your employer's HR department.
2. Fill in your personal information at the top of the form, including your name, Social Security number, and address.
3. Indicate your contribution preferences in the appropriate sections, selecting the percentages you want to allocate to each TSP fund.
4. Review the designated beneficiaries section and ensure you provide the necessary information for each beneficiary, including their name, Social Security number, and relationship to you.
5. Sign and date the form at the designated section.
6. Submit the completed form to the appropriate TSP office or your HR department as instructed.

Who needs TSP-3?

1. The TSP-3 form is needed by federal employees and members of the uniformed services who wish to designate or update their beneficiaries for the Thrift Savings Plan.

• Who needs a TSP-3 form?
• What is the purpose of the TSP-3 form?
• Which documents must accompany the TSP-3 form?
• • How long does it take to fill the form out?
  • What information should be provided in the TSP-3 form?
  • What do I do with the form after its completion?

Who needs a TSP-3 form?

This form is used by the individuals who want to designate a beneficiary to receive their Thrift Savings Plan (TSP) account after their death. Your TSP account can be transferred according to the statutory order of precedence (to the widow; children; parents; appointed executor; next of kin entitled to the estate under the laws of the state), but if you want some special terms — fill out this form.

What is the purpose of the TSP-3 form?

The Designation of Beneficiary is completed to assign the specific beneficiaries to receive money from the TSP account after the applicant’s death. The TSP must receive this form before the person who fills it dies.

Which documents must accompany the TSP-3 form?

This form may be accompanied by additional documents on the TSP request.

How long does it take to fill the form out?

The estimated time for completing the form is 60 minutes. The form should be completed when there is a need.

What information should be provided in the TSP-3 form?

The filler must print all the information as it will be read by an optical scanner.

The TSP-3 form contains the following parts for completion:

• Participant information (name, TSP account number, date of birth, daytime phone, address)
• Cancellation
• Signatures (of the participants and witnesses)
• Primary beneficiary designations (enter the share for each beneficiary as a whole percentage)
• Contingent beneficiary designations (they will share the portion of the TSP account that you designated for a specific primary beneficiary who dies before the applicant).

The filler and the witnesses must sign and date all additional pages.

What do I do with the form after its completion?

The completed and signed Designation of Beneficiary is forwarded to the Thrift Savings Plan, Birmingham, AL. If you have any questions concerning the form, call the toll-free Thrifting 1-877-968-3778.

Instructions and Help about TSP-3

Hello this is Dave Barclay with electronics incorporated I like to show you a couple of things that you can adjust on your TSP 3 gauge from electronics incorporated first thing I'm going to do is turn the gauge on by pushing the zero on button, and you can see that we are in inch mode by the n in the lower right corner and if I push down on a dial indicator we are down four decimal places in inch mode to switch to metric I'm going to push the inch metric button or inch millimeter button, and you note that down here in the bottom right corner, and I'll show that shows mm so in millimeter mode and if I push down we're showing three decimal places out in millimeters however if you take a closer look at this you can see that the resolution of that third decimal place is only a 2 4 6 8 and 0 that's not acceptable purge a 443, so I need to make a resolution change on the gauge so in order to make a resolution change you need to go in a program mode to do this we're going to push the inch millimeter button while pushing them off button at the same time and that brings up this m1 to start with and this shows it we're in program mode now this m1 is selecting the zoom resolution of this scale across the top of the gauge we want to leave that in x1, so we're going to go to the next mode by pushing the em off button again you can see we're in m2 this should all be zeroed out so if it's not zero hit zero one button to zero it, and we're going to go to m12 then a m23 and then finally m1 and then a space and a three this is where we want to be to make a resolution change here it's showing us that we are three decimal places out and that our resolution is set at point zero to buy toggle through the options with selecting the inch millimeter button I can just hit at one time, and now I'm down to point zero one resolution I'll go ahead and toggle it again to show you other options now to point zero zero zero five resolution two and then even more course settings, but we want three decimal places at point zero one and once I'm there I'm just going to hit the em off button again and put us back into operational mode and when I push down on the indicator you can see how are getting those odd numbers in there again, and we're three decimal places, so now we're conforming to Jay 443 requirements now sometimes people receive their gauge in this condition to wear when it's operating in metric it's working just fine having the three decimal places with the proper resolution but then when you switch it over in the English or into the inch mode pushing the inch millimeter button and I push down on the dial indicator you can see we're down five decimal places and our resolution is point zero zero zero zero five well this can be troublesome for some people, so I am going to show you how to switch it back and when you are in inch mode you're going to do the same procedure we're going to push both the em off an inch millimeter button at the same time bringing up on our program...

People Also Ask about

What is a TSP 75 withdrawal form?

The TSP-75 form is an Age-Based In-Service Withdrawal Request. Someone who is over the age of 59 and a half and still employed by the federal government can use this form to request a withdrawal of funds from their Thrift Savings Plan. This form will require personal information so the account can be identified.

What is a TSP 77 form?

A TSP 77 form is used with Thrift Savings Plans (TSPs). A TSP is a retirement account that is only available if they are a federal employee, a member of the US Armed Forces, or their family members. This form is also known as a Request for Partial Withdrawal When Separated.

How do I fill out a TSP-3 form?

To complete a TSP-3, you will need to provide the following information: Participant Information. Name. Cancellation. Indicate if you want to cancel all previous designations without naming new beneficiaries. Primary Beneficiary Designations. Relationship to you. Signatures. Contingent beneficiary designations.

What is a TSP form 3?

Use this form to designate a beneficiary or beneficiaries to receive your Thrift Savings Plan (TSP) account after your death. If you would like your TSP account to be distributed ing to the statutory order of precedence, do not complete this form.

What is the TSP form for full withdrawal?

Form TSP 70 is the form you need to fill up and submit when making a request for a full and immediate withdrawal of your entire vested Thrift Savings Plan (TSP) account balance. The TSP 70 form may be used only after you leave federal employment, and your employing agency confirms your separation from Federal service.

For pdfFiller’s FAQs

How do I edit TSP-3 in Chrome?

TSP-3 can be edited, filled out, and signed with the pdfFiller Google Chrome Extension. You can open the editor right from a Google search page with just one click. Fillable documents can be done on any web-connected device without leaving Chrome.

Can I sign the TSP-3 electronically in Chrome?

As a PDF editor and form builder, pdfFiller has a lot of features. It also has a powerful e-signature tool that you can add to your Chrome browser. With our extension, you can type, draw, or take a picture of your signature with your webcam to make your legally-binding eSignature. Choose how you want to sign your TSP-3 and you'll be done in minutes.

How do I complete TSP-3 on an Android device?

Complete TSP-3 and other documents on your Android device with the pdfFiller app. The software allows you to modify information, eSign, annotate, and share files. You may view your papers from anywhere with an internet connection.

What is TSP-3?

TSP-3 is a form used by participants of the Federal Employees Retirement System (FERS) to designate or change their beneficiary information for their Thrift Savings Plan (TSP) account.

Who is required to file TSP-3?

Current participants of the TSP who wish to designate or update their beneficiaries are required to file TSP-3.

How to fill out TSP-3?

To fill out TSP-3, participants need to provide their personal information, list their primary and contingent beneficiaries, and sign and date the form to confirm their selections.

What is the purpose of TSP-3?

The purpose of TSP-3 is to allow participants to specify who will inherit their TSP savings in the event of their death.

What information must be reported on TSP-3?

The information that must be reported on TSP-3 includes the participant's name, address, TSP account number, the names and details of beneficiaries, and the participant's signature.