Get the free Plinth Area Rates - cpwd gov

This document provides the revised plinth area rates for residential and non-residential buildings effective from October 1, 2012, and is designed for use by various government departments and construction

How to fill out plinth area rates

How to fill out Plinth Area Rates

1. Identify the type of building for which Plinth Area Rates are to be calculated.
2. Gather the necessary data, including the total built-up area of the building.
3. Research and locate the official Plinth Area Rates provided by local authorities or government sources.
4. Ensure the Plinth Area Rates are updated and reflect current market conditions.
5. Multiply the total built-up area by the applicable Plinth Area Rate to estimate the cost.

Who needs Plinth Area Rates?

1. Real estate developers for assessing construction costs.
2. Architects and planners for project budgeting.
3. Local government officials for tax assessments and urban planning.
4. Homebuyers to understand potential property costs.

People Also Ask about

What is the other name for the plinth area?

Plinth area: It is the covered built-up area measured at the floor level of any storey or at the floor level of the basement. The plinth area is also called a built-up area and is the entire area occupied by the building including internal and external walls.

How do you calculate plinth area?

The plinth area is typically calculated by subtracting the square footage of floors above ground level from the total square footage below ground level. The difference represents the areas of the building that are not covered by floors.

What is plinth area rate?

Simply it can be also stated as the roof covered area of a building. Plinth area rate is derived by dividing the total cost of a previously constructed building by plinth area of the previously constructed building. Plinth area estimate = Plinth area X plinth area rate.

What is the covered area and plinth area?

As mentioned above, the plinth area is the built-up area that lies within the exterior dimensions of the walls of a building at any floor level. It usually measures at 10% to 20% higher than the calculated carpet aarea. Covered area refers to the area under the roof of the building.

What is meant by plinth area?

What is the Plinth Area? Plinth area refers to the covered built-up area measured at the floor level of any storey. It includes the area of the internal and external walls, lobby, corridors, and the space under the walls. It does not include open areas such as terraces, balconies, or any other uncovered spaces.

What's the difference between plinth and floor area?

The plinth area represents the total built-up space, while the carpet area represents the usable floor space inside the property. Homebuyers should check these details carefully to ensure they understand what they are purchasing.

What is the plinth area of a commercial building?

Plinth area: The total covered area measured at the floor level of any building or structure, including the thickness of the outer walls. It is essentially the area enclosed by the outer walls. Carpet area: The actual usable area within the walls of a flat or building, excluding the area occupied by the walls.

What is the difference between covered area and plinth area?

Difference Between Plinth Area and Covered Area It is approximately 8 to 10% more than the carpet area. Plinth area: It is the covered built-up area measured at the floor level of any storey or the floor level of a building's basement and is approximately 10 to 20% more than the carpet area.

For pdfFiller’s FAQs

What is Plinth Area Rates?

Plinth Area Rates refer to the standardized rates applied for calculating the value or cost of construction based on the plinth area of a building, which is the total covered area on the ground level.

Who is required to file Plinth Area Rates?

Typically, builders, architects, and property developers are required to file Plinth Area Rates when submitting construction plans or estimates for approval to local authorities or during the taxation process.

How to fill out Plinth Area Rates?

To fill out Plinth Area Rates, one must measure the total plinth area of the building in square meters, apply the applicable rates per square meter based on local regulations, and provide detailed construction specifications.

What is the purpose of Plinth Area Rates?

The purpose of Plinth Area Rates is to provide a consistent framework for evaluating the costs of construction projects, facilitating fair taxation, and combating discrepancies in property valuations.

What information must be reported on Plinth Area Rates?

The information to be reported includes the plinth area measurements, applicable rates, total estimated cost of construction, construction specifications, and any variations based on building type or location.