Get the free SAR Test Report

This document certifies the compliance of the LS Research Model TiWi-R1 with EU Directive 1999/519/EC concerning specific absorption rate (SAR) in mobile and portable devices. It includes details

How to fill out sar test report

How to fill out SAR Test Report

1. Begin with the header: Include the title 'SAR Test Report' followed by the date and identification number.
2. Section 1: General Information - Fill in the details of the test subject including name, address, and contact information.
3. Section 2: Test Setup - Describe the testing environment, including equipment used, location, and any relevant standards or guidelines.
4. Section 3: Test Methodology - Outline the procedures followed during the test, including the setup, performance tests, and data collection methods.
5. Section 4: Test Results - Present the results clearly, using tables or charts as necessary. Include any relevant calculations.
6. Section 5: Conclusions - Summarize the findings and implications of the test results.
7. Section 6: Recommendations - Provide actionable recommendations based on the test outcomes.
8. Section 7: Appendices - Include any additional materials such as raw data, calibration certificates, or reference documents.
9. Final Review: Proofread the report for clarity, accuracy, and completeness before submission.

Who needs SAR Test Report?

1. Regulatory agencies requiring compliance documentation for electromagnetic exposure.
2. Manufacturers of wireless devices to verify safety standards.
3. Quality assurance teams evaluating the performance of electronic products.
4. Design engineers needing data for product development and improvements.
5. Health and safety professionals assessing risk in workplace environments.

People Also Ask about

What does high SAR mean?

If your water has a high SAR, it generally means sodium in your water will cause hardening and compaction of your soil.

What is a good SAR value for head and body?

MRI scanner SAR testing Whole-body SARHead SAR Normal 2 3.2 1st level controlled 4 3.2 2nd level controlled >4 >3.2 Short-duration SAR The SAR limit over any 10 s period shall not exceed two times the stated values2 more rows

How much does a SAR test cost?

The cost of sar testing typically ranges from $500 to $3,000, depending on the specific product.

What is a SAR test?

SAR testing is important because it measures the amount of RF energy absorbed by biological tissue when using a wireless device over a period of time. This testing allows you to demonstrate that your product complies with international established RF exposure limits.

Does a lower SAR level mean a safer phone?

Does a lower SAR mean that a phone is safer? No. Variations in SAR do not mean that there are variations in safety. While there may be differences in SAR levels among phone models, all mobile phones must meet RF exposure guidelines.

What is the normal SAR level?

SAR must not exceed 2 Watts per kilogram In order to avoid adverse health effects, the specific absorption rate of a mobile phone must not exceed 2 Watts per kilogram. Since 1998 this value is recommended as a limit by the International Commission on Non-Ionizing Radiation Protection ( ICNIRP ).

What is a SAR test report?

SAR testing is important because it measures the amount of RF energy absorbed by biological tissue when using a wireless device over a period of time. This testing allows you to demonstrate that your product complies with international established RF exposure limits.

For pdfFiller’s FAQs

What is SAR Test Report?

A SAR Test Report is a document that assesses and verifies the compliance of a device with specific safety and operational standards, particularly in regards to Specific Absorption Rate (SAR) which measures the rate at which energy is absorbed by the body when exposed to electromagnetic fields.

Who is required to file SAR Test Report?

Manufacturers and importers of electronic devices that emit electromagnetic fields, such as mobile phones and other wireless communication devices, are required to file SAR Test Reports to demonstrate compliance with safety regulations.

How to fill out SAR Test Report?

To fill out a SAR Test Report, you must provide details about the device under assessment, including its specifications, testing procedures used, test results, and any compliance declarations. Additionally, you must include information about the testing laboratory and references to standards used.

What is the purpose of SAR Test Report?

The purpose of a SAR Test Report is to ensure that electronic devices meet safety standards related to electromagnetic exposure, to inform consumers and regulatory bodies about potential health risks, and to facilitate regulatory compliance.

What information must be reported on SAR Test Report?

A SAR Test Report must include information such as device identification, test conditions, measurement methods, results of SAR testing, compliance status with relevant standards, and details about the testing laboratory.