Get the free ITB-10-3 Bituminous Surface Treatment Aggregate.doc

THIS DOCUMENT CANNOT BE RE-DISTRIBUTED OR SOLD WITHOUT THE CONSENT OF THE CHAVES COUNTY PURCHASING DIRECTOR. IF YOU HAVE OBTAINED THIS DOCUMENT FROM A SOURCE OTHER THAN THE NM PROCUREMENT SYSTEM (BIDET),

How to fill out itb-10-3 bituminous surface treatment

How to fill out itb-10-3 bituminous surface treatment:

1. Begin by gathering all the necessary materials and tools for the job, including bitumen, aggregate, a sprayer, a broom, and safety gear such as gloves and goggles.
2. Prepare the surface by ensuring it is clean, dry, and free of any debris or loose materials. This can be done by sweeping or pressure washing the area.
3. Prime the surface by applying a thin layer of bitumen emulsion evenly across the entire area, using the sprayer. Make sure to follow the manufacturer's instructions regarding the emulsion's dilution ratio and application rate.
4. Allow the primer to cure for the specified time, usually around 24 hours, to ensure adequate adhesion between the existing surface and the bituminous treatment.
5. Once the primer is fully cured, apply the bituminous surface treatment, which consists of a mixture of bitumen and aggregate. Again, use the sprayer to evenly distribute the mixture across the surface, ensuring proper coverage.
6. After applying the bitumen-aggregate mixture, use a broom to spread and embed the aggregate evenly into the bitumen, ensuring a smooth and uniform surface.
7. Allow the bituminous surface treatment to cure for the recommended time, usually around 48 hours, before allowing any traffic or additional construction activities on the treated surface.
8. Regular maintenance, including periodic resealing and reapplication of the bituminous surface treatment, may be required to maintain its effectiveness and extend its lifespan.

Who needs itb-10-3 bituminous surface treatment?

1. Contractors and construction companies involved in road construction and pavement maintenance projects often utilize bituminous surface treatments to protect and enhance the durability of asphalt pavement surfaces.
2. Municipalities and government agencies responsible for maintaining road networks may use bituminous surface treatments as a cost-effective solution to extend the life of existing roads and prevent further deterioration.
3. Individuals or businesses that own large private driveways or parking areas may choose to apply bituminous surface treatments to protect their asphalt surfaces from wear and tear caused by vehicles and harsh weather conditions.

For pdfFiller’s FAQs

What is itb-10-3 bituminous surface treatment?

Itb-10-3 bituminous surface treatment is a method of applying a layer of bitumen on a road surface to improve its durability and resistance to wear and tear.

Who is required to file itb-10-3 bituminous surface treatment?

Contractors and construction companies responsible for road maintenance and construction projects are typically required to file itb-10-3 bituminous surface treatment.

How to fill out itb-10-3 bituminous surface treatment?

To fill out itb-10-3 bituminous surface treatment, you need to provide information such as project details, location, materials used, application methods, and any relevant measurements.

What is the purpose of itb-10-3 bituminous surface treatment?

The purpose of itb-10-3 bituminous surface treatment is to enhance the lifespan and quality of road surfaces by providing a protective layer against weathering, traffic, and aging.

What information must be reported on itb-10-3 bituminous surface treatment?

Information that must be reported on itb-10-3 bituminous surface treatment includes project details, location, materials used, application methods, thickness of the treatment, and any other relevant specifications.

Where do I find itb-10-3 bituminous surface treatment?

It's simple using pdfFiller, an online document management tool. Use our huge online form collection (over 25M fillable forms) to quickly discover the itb-10-3 bituminous surface treatment. Open it immediately and start altering it with sophisticated capabilities.

Can I edit itb-10-3 bituminous surface treatment on an iOS device?

Use the pdfFiller mobile app to create, edit, and share itb-10-3 bituminous surface treatment from your iOS device. Install it from the Apple Store in seconds. You can benefit from a free trial and choose a subscription that suits your needs.

How can I fill out itb-10-3 bituminous surface treatment on an iOS device?

Install the pdfFiller iOS app. Log in or create an account to access the solution's editing features. Open your itb-10-3 bituminous surface treatment by uploading it from your device or online storage. After filling in all relevant fields and eSigning if required, you may save or distribute the document.