Get the free WELL COMPLETION REPORT

This document serves to report the completion of the well construction and pump installation at Puakukui Springs in Kauai, Hawaii, providing essential details about the well's construction, drilling,

How to fill out well completion report

How to fill out WELL COMPLETION REPORT

1. Gather necessary data such as well location, project details, and drilling information.
2. Fill out the well identification section with well name, API number, and ownership details.
3. Document the drilling and completion methods used during the well development.
4. Include details on the formation penetrated and any encountered fluids.
5. Record the final well status (producing, abandoned, etc.) and any testing results.
6. Attach any relevant diagrams or additional documentation as needed.
7. Review all entries for accuracy before submission.

Who needs WELL COMPLETION REPORT?

1. Drilling engineers and contractors for project documentation.
2. Regulatory agencies for compliance purposes.
3. Investors and stakeholders for project financial assessments.
4. Geologists and environmental scientists for research and analysis.

People Also Ask about

How to find the well on your property?

Clues to the location of these wells include: Pipes sticking out of the ground. Small buildings that may have been a well house. Depressions in the ground. The presence of concrete vaults or pits (perhaps covered by lumber or metal plates) Out-of-use windmills (windpumps) are likely to be located near an old well.

Where can I get my well water tested for free?

Some counties offer free well water testing, so check with your county first. If they don't, use this EPA website to find a list of state-certified laboratories in your area that do water testing, or contact your county or state health department or your State Certification Officer for assistance.

What are the steps of well completion?

What Are The Steps of Well Completion? Casing Process. Hole Completions. Perforation. Gravel Packing. Production Tubing Placement. Production Tree Installation. Barefoot Completion. Open Hole.

What does completion of a well include?

Well completion is the process of making a well ready for production. This process mainly involves the following steps: Preparing the bottom of the hole to the required specifications. Running in the production tubing and its associated downhole tools.

What is a well completion report?

The well completion report provides information about the total depth of the well, the date the well was drilled, the contractor and the permit number.

Where do I find my well report?

You can get the information from the company who drilled the well. You can get a copy of the well report from your state.

What are the stages of a well?

Wells have three basic stages of production, the first or primary stage, the secondary stage, and the tertiary stage. Each stage is distinguished by the type and variety of recovery methods used.

What are the basic well completions?

For a simple open-hole well completion, the process involves setting production casing above the zone of interest before drilling into it, leaving it open to the wellbore, and then installing wellhead equipment to control flow.

What are the steps involved in well completion?

Completion steps involve removal of the drill string, casing, cementing, perforating, hydraulically fracturing in the reservoir to stimulate production, expelling drilling and fracturing fluids, and installing the production valve.

For pdfFiller’s FAQs

What is WELL COMPLETION REPORT?

A WELL COMPLETION REPORT is a detailed document that provides information about the completion phase of a well, including data on well construction, equipment used, and performance metrics. It serves as a record of the activities performed during the completion process.

Who is required to file WELL COMPLETION REPORT?

Operators of oil and gas wells are typically required to file a WELL COMPLETION REPORT with relevant regulatory authorities. This includes companies or individuals that drill and complete wells for hydrocarbon extraction.

How to fill out WELL COMPLETION REPORT?

To fill out a WELL COMPLETION REPORT, operators must provide accurate data regarding the well's location, design, completion methods, testing results, and any incidents during the completion phase. The report often includes sections for various types of completion activities, equipment used, and final measurements.

What is the purpose of WELL COMPLETION REPORT?

The purpose of a WELL COMPLETION REPORT is to ensure accurate documentation of the well's completion, facilitate regulatory compliance, provide operational insights, and serve as a reference for future activities, including maintenance and performance evaluations.

What information must be reported on WELL COMPLETION REPORT?

A WELL COMPLETION REPORT must include information such as well identification, type of well, completion method, depth and dimensions of the well, materials and equipment used, production tests results, and any monitoring data relevant to the well's performance.