Get the free Well Completion Report

This document serves as a detailed report for the completion and details of Well No. 5844-02, including well construction, pumping installation, and test results as per state requirements.

How to fill out well completion report

How to fill out Well Completion Report

1. Begin by entering the well identification number.
2. Fill in the date of completion.
3. Provide details on the well location, including latitude and longitude.
4. Describe the well type (e.g., production, observation).
5. Include information on the drilling contractor and the well operator.
6. Document the completion interval and the formation details.
7. List the completion method and equipment used.
8. Fill in any stimulation methods applied or additional treatments.
9. Record the production data, including flow rates and pressures.
10. Add any pertinent notes or comments.

Who needs Well Completion Report?

1. Well Completion Reports are needed by regulatory agencies, drilling operators, environmental engineers, and investors involved in the oil and gas industry.

People Also Ask about

What is the date of completion of a well?

“Date of completion” means: For an oil well, the date that the well first produces oil into the lease tanks through permanent wellhead equipment. For a gas well, the date of completion of a gas well is the date that gas is capable of being delivered to a pipeline purchaser.

Where do I find my well report?

You can get the information from the company who drilled the well. You can get a copy of the well report from your state.

How to find the well on your property?

Clues to the location of these wells include: Pipes sticking out of the ground. Small buildings that may have been a well house. Depressions in the ground. The presence of concrete vaults or pits (perhaps covered by lumber or metal plates) Out-of-use windmills (windpumps) are likely to be located near an old well.

Are well locations public record?

Public access to many of these data are provided via the USGS Water Data for the Nation site (additional background). The Groundwater database consists of more than 850,000 records of wells, springs, test holes, tunnels,drains, and excavations in the United States.

Where can I get my well water tested for free?

Some counties offer free well water testing, so check with your county first. If they don't, use this EPA website to find a list of state-certified laboratories in your area that do water testing, or contact your county or state health department or your State Certification Officer for assistance.

What is the primary purpose of well completion?

After drilling is completed, wells undergo completion procedures to prepare them for production. This involves setting production casing and cementing it through the target zone. Tubing is run inside the casing with a packer to isolate the production zone.

What is a completion report?

Completion Report means the final report prepared by the Consultant at the completion of the Services (for detailed requirements refer to Appendix 1, Scope of Services).

What is a well completion report?

The well completion report provides information about the total depth of the well, the date the well was drilled, the contractor and the permit number.

For pdfFiller’s FAQs

What is Well Completion Report?

A Well Completion Report is a document that provides detailed information about the completion process of a well, including the methods used, materials installed, and the final status of the well.

Who is required to file Well Completion Report?

Typically, the operator or company responsible for the drilling and completion of the well is required to file the Well Completion Report with the appropriate regulatory authority.

How to fill out Well Completion Report?

To fill out a Well Completion Report, one should gather all relevant data regarding the well's completion, including measurements, materials, and procedures used, and complete each section of the report as required by the governing body, ensuring accuracy and thoroughness.

What is the purpose of Well Completion Report?

The purpose of the Well Completion Report is to document the completion of a well for regulatory compliance, ensure safety, provide information for resource management, and facilitate future reference in monitoring and operations.

What information must be reported on Well Completion Report?

The Well Completion Report must typically include information such as well location, depth, completion method, type of casing used, perforation details, production testing results, and any other relevant operational details.