WI SBD - Cat 1 E 2013 free printable template

STATE OF WISCONSIN Department of Safety and Professional Services 1400 E Washington Ave. Madison WI 53703 Governor Scott Walker Secretary Dave Ross Periodic Hydraulic Elevator Test Record - Category 1 ASME A17.

How to fill out WI SBD - Cat 1 E

How to fill out elevator category 1 safety:

1. First, gather all relevant documentation and information about the elevator. This may include manuals, maintenance records, inspection reports, and any other relevant documents.
2. Review the elevator regulations and guidelines specific to your jurisdiction. This will provide you with the necessary requirements for filling out the category 1 safety form.
3. Carefully read and understand each section of the form. Ensure that you have all the necessary information and details to complete each section accurately.
4. Begin by providing the basic information about the elevator, such as the make, model, and serial number. Also, include the date of installation and any other relevant dates.
5. Move on to the safety features section of the form. This will require you to detail the specific safety devices and features installed in the elevator. Include information on items such as emergency stop buttons, door sensors, and emergency phones.
6. Next, fill out the maintenance and testing section. Document any maintenance activities that have been performed on the elevator, including routine check-ups and repairs. Indicate the frequency of these maintenance activities.
7. Complete the inspection records section of the form. Provide details about past inspections, including the dates, inspector information, and any findings or deficiencies.
8. Once you have completed all sections of the form, review it for accuracy and completeness. Make sure that all required information has been provided and that there are no mistakes or omissions.
9. Finally, sign and date the form to confirm that the information provided is correct to the best of your knowledge.
10. Keep a copy of the completed form for your records and submit it to the appropriate regulatory body or authority.

Who needs elevator category 1 safety:

1. Building owners who have elevators installed on their premises.
2. Property managers responsible for maintaining the safety and functionality of elevators in commercial or residential buildings.
3. Elevator manufacturers and contractors involved in the installation, maintenance, and repair of elevators.

People Also Ask about

How to do an elevator test?

Elevator Test Cases Verify the height, width, and life volume per the requirement. Verify that buttons for the closing lift, opening lift, fan, emergency, and all floor numbers should be there on the button panel. Verify the presence of a display where the floor number appears.

What are the four phases of inspection?

The Inspection Process is divided into four phases: Sensitization, Pre-Inspection, Inspection and Quality Assurance.

Which of the following elevator safety tests must be performed every 5 years?

Traction elevators are also required to have a “full load safety test” performed once every five years.

What is elevator safety test?

A load test is performed to ensure that your elevator is operating as it should. These tests make sure that elevators can lift their maximum load while traveling at their maximum speed. Load tests also check how elevators operate with no load, as well as test how well brake mechanisms are working.

What is elevator testing?

Elevator Testing and Inspections These tests make sure that elevators can lift their maximum load while traveling at their maximum speed. Load tests also check how elevators operate with no load, as well as test how well brake mechanisms are working.

How do you write an elevator test case?

Elevator Test cases Elevator is capable of moving up and down. It is stopping at each floor. It moves exactly to that floor when corresponding floor no is pressed. It moves up when called from upward and down when called from downward. It waits until 'close' button is pressed.

What are the test cases for elevator?

Elevator Test cases Elevator is capable of moving up and down. It is stopping at each floor. It moves exactly to that floor when corresponding floor no is pressed. It moves up when called from upward and down when called from downward. It waits until 'close' button is pressed.

How to do elevator load test?

To conduct the load test, the elevator engineer will operate the equipment in each direction and see if the ropes stay in the correct position, the brakes are working fine, and the elevator is stopping at the correct distance as per the applied codes.

What is Category 1 testing for an elevator?

Category 1 Elevator Inspection The Category 1 test required by the DOB must be scheduled with a licensed inspection agency and a certified category test witness. The inspection itself typically takes 2 hours for each elevator cab and includes: all safety devices (no-load test) cables used for suspension.

How do you write a test case for a lift?

Test Scenarios of Lift Verify the dimensions of the lift. Verify the type of door of the lift is as per the specification. Verify the type of metal used in the lift interior and exterior. Verify the capacity of the lift in terms of the total weight.

For pdfFiller’s FAQs

How can I modify WI SBD - Cat 1 E without leaving Google Drive?

By combining pdfFiller with Google Docs, you can generate fillable forms directly in Google Drive. No need to leave Google Drive to make edits or sign documents, including WI SBD - Cat 1 E. Use pdfFiller's features in Google Drive to handle documents on any internet-connected device.

How do I execute WI SBD - Cat 1 E online?

pdfFiller makes it easy to finish and sign WI SBD - Cat 1 E online. It lets you make changes to original PDF content, highlight, black out, erase, and write text anywhere on a page, legally eSign your form, and more, all from one place. Create a free account and use the web to keep track of professional documents.

Can I create an eSignature for the WI SBD - Cat 1 E in Gmail?

When you use pdfFiller's add-on for Gmail, you can add or type a signature. You can also draw a signature. pdfFiller lets you eSign your WI SBD - Cat 1 E and other documents right from your email. In order to keep signed documents and your own signatures, you need to sign up for an account.

What is elevator category 1 safety?

Elevator category 1 safety refers to the initial safety inspection and testing of an elevator to ensure compliance with safety regulations and standards. This category typically includes inspections of mechanical, electrical, and structural components to certify that they are functioning properly and safely.

Who is required to file elevator category 1 safety?

Owners or operators of elevators are typically required to file elevator category 1 safety reports. This may also include maintenance companies and certified inspectors who perform the safety checks and necessary documentation.

How to fill out elevator category 1 safety?

To fill out elevator category 1 safety documentation, the inspector must record the results of the inspection and testing, including any repairs or modifications made. Detailed information about the elevator's specifications, safety features, and compliance with local codes should be included.

What is the purpose of elevator category 1 safety?

The purpose of elevator category 1 safety is to ensure the safe operation of elevators, prevent accidents, and protect users by adhering to established safety regulations. This helps maintain public safety and ensures that elevators are functioning correctly.

What information must be reported on elevator category 1 safety?

The information that must be reported on elevator category 1 safety includes the date of inspection, identification details of the elevator, results of the safety tests, any identified issues, corrective actions taken, and the inspector’s credentials.