Get the free CLASS III UIC PERMIT APPLICATION FOR PRODUCTION OF BRINE FROM SUB-SURFACE FORMATIONS...

This document is an application to the Kansas Department of Health and Environment for a permit to construct a salt solution mining well for the production of brine using hydraulic methods. It outlines

How to fill out class iii uic permit

How to fill out CLASS III UIC PERMIT APPLICATION FOR PRODUCTION OF BRINE FROM SUB-SURFACE FORMATIONS BY HYDRAULIC METHODS

1. Obtain the CLASS III UIC PERMIT APPLICATION form from the appropriate regulatory agency.
2. Fill in the applicant's contact information including name, address, and phone number.
3. Provide detailed information about the proposed site location including latitude and longitude coordinates.
4. Describe the specific sub-surface formations you intend to use for brine production.
5. Include details about the hydraulic methods planned for extracting brine, ensuring compliance with regulations.
6. Attach necessary geologic and hydrologic data supporting the application.
7. Fill out any additional sections pertaining to potential environmental impacts and mitigation measures.
8. Review the application for completeness and accuracy.
9. Submit the application to the regulatory agency along with any required fees.
10. Follow up to ensure the application is being processed and respond to any requests for additional information.

Who needs CLASS III UIC PERMIT APPLICATION FOR PRODUCTION OF BRINE FROM SUB-SURFACE FORMATIONS BY HYDRAULIC METHODS?

1. Individuals or companies intending to extract brine from sub-surface formations using hydraulic methods.
2. Those looking to engage in commercial brine production for uses such as de-icing, water treatment, or industrial processes.
3. Entities involved in geologic exploration and resource management related to sub-surface brine.

People Also Ask about

What is the definition of underground source of drinking water?

An underground source of drinking water is defined as an aquifer that supplies a public water system, or contains a sufficient quantity of groundwater to supply a public water system; and currently supplies drinking water for human consumption; or contains fewer than 10,000 mg/L total dissolved solids.

What is a class I landfill?

Class 1 Landfill – Hazardous Waste. Class 1 landfills are regulated by the California Department of Toxic Substances Control, with local monitoring and mitigation for water and air quality impacts conducted by Regional Water Quality Control Boards and Air Quality Management Districts.

What types of liquids are disposed of through deep well injection?

An injection well is used to place fluid underground into porous geologic formations. These underground formations may range from deep sandstone or limestone, to a shallow soil layer. Injected fluids may include water, wastewater, brine (salt water), or water mixed with chemicals.

What is the difference between a Class 1 and Class 2 well?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, isolated rock formations. Class II wells are used exclusively to inject fluids associated with oil and natural gas production. Class III wells are used to inject fluids to dissolve and extract minerals.

What is a class 1 injection well?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, confined rock formations. Class I wells are typically drilled thousands of feet below the lowermost underground source of drinking water (USDW). Approximately 800 operational Class I wells exist in the United States.

What is a class I injection well?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, confined rock formations. Class I wells are typically drilled thousands of feet below the lowermost underground source of drinking water (USDW). Approximately 800 operational Class I wells exist in the United States.

What have injection wells where fracking fluid wastewater is disposed of been linked to?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, confined rock formations. Class I wells are typically drilled thousands of feet below the lowermost underground source of drinking water (USDW). Approximately 800 operational Class I wells exist in the United States.

What is a type III well?

Class III wells are used to inject fluids to dissolve and extract minerals.

What are deep well injections used to dispose of?

Widespread use of injection wells began in the 1930s to dispose of brine generated during oil production. Injection effectively disposed of unwanted brine and preserved surface waters. In some formations injection enhanced the recovery of oil.

What is deep well disposal of liquid waste?

Deep well injection is the process of safely storing or disposing of liquids deep underground. It involves drilling beneath drinking water aquifers (1,500 to >3,000 feet deep) to trap the liquid waste under multiple impermeable layers of rock. It requires favorable geology, so it is not suitable for all locations.

For pdfFiller’s FAQs

What is CLASS III UIC PERMIT APPLICATION FOR PRODUCTION OF BRINE FROM SUB-SURFACE FORMATIONS BY HYDRAULIC METHODS?

The CLASS III UIC PERMIT APPLICATION is a regulatory submission required for the production of brine from sub-surface formations using hydraulic methods. This application ensures compliance with environmental protections and safe operational practices in the underground injection control (UIC) program.

Who is required to file CLASS III UIC PERMIT APPLICATION FOR PRODUCTION OF BRINE FROM SUB-SURFACE FORMATIONS BY HYDRAULIC METHODS?

Operators or companies that intend to extract brine from sub-surface formations utilizing hydraulic methods must file the CLASS III UIC PERMIT APPLICATION to obtain the necessary regulatory approval.

How to fill out CLASS III UIC PERMIT APPLICATION FOR PRODUCTION OF BRINE FROM SUB-SURFACE FORMATIONS BY HYDRAULIC METHODS?

To fill out the CLASS III UIC PERMIT APPLICATION, applicants should carefully provide all requested information, including details about the project location, operational methods, environmental impact assessments, and any relevant geological data. It is essential to follow the guidelines provided by the regulatory agency and to submit all supporting documents.

What is the purpose of CLASS III UIC PERMIT APPLICATION FOR PRODUCTION OF BRINE FROM SUB-SURFACE FORMATIONS BY HYDRAULIC METHODS?

The purpose of the CLASS III UIC PERMIT APPLICATION is to ensure that the production of brine is conducted safely while protecting underground sources of drinking water (USDW) and the environment from potential contamination and adverse effects.

What information must be reported on CLASS III UIC PERMIT APPLICATION FOR PRODUCTION OF BRINE FROM SUB-SURFACE FORMATIONS BY HYDRAULIC METHODS?

The CLASS III UIC PERMIT APPLICATION must include information such as operator details, project location, geological characteristics of the site, volumes and types of fluids to be injected, plans for monitoring and reporting, as well as measures for environmental protection and safety protocols.