Get the free Drinking Water Treatment Residual Class V Injection Well Permit Application - kdheks

This document is an application form submitted to the Kansas Department of Health and Environment for obtaining a permit for the disposal of liquid wastes via an injection well. It outlines the requirements

How to fill out drinking water treatment residual

How to fill out Drinking Water Treatment Residual Class V Injection Well Permit Application

1. Gather all necessary information regarding the Drinking Water Treatment Residuals.
2. Obtain the application form for the Class V Injection Well Permit.
3. Fill out Section 1 of the application, providing details about the facility and contact information.
4. Complete Section 2, detailing the nature and volume of the residuals to be injected.
5. In Section 3, describe the injection well, including its location, construction, and type.
6. Fill Section 4 with any necessary supporting documentation, such as geological studies or environmental assessments.
7. Review the completed application for accuracy and completeness.
8. Submit the application to the appropriate regulatory authority, ensuring any required fees are included.

Who needs Drinking Water Treatment Residual Class V Injection Well Permit Application?

1. Operators of facilities that treat drinking water and generate treatment residuals.
2. Entities seeking to engage in the disposal of drinking water treatment residuals via Class V injection wells.
3. Any organization or individual planning to comply with federal or state groundwater protection regulations regarding injection wells.

People Also Ask about

What is a class 5 injection well?

Class V wells are used to inject non-hazardous fluids underground. Most Class V wells are used to dispose of wastes into or above underground sources of drinking water. This disposal can pose a threat to ground water quality if not managed properly.

What is a Class 4 well?

Class IV wells are shallow wells used to dispose hazardous or radioactive wastes into or above a geologic formation that contains an underground source of drinking water (USDW).

What are the different classes of injection wells?

Class I wells are used to inject hazardous and non-hazardous wastes into deep, isolated rock formations. Class II wells are used exclusively to inject fluids associated with oil and natural gas production. Class III wells are used to inject fluids to dissolve and extract minerals.

What is the difference between Class 2 and Class VI wells?

The capital requirements for Class II wells are similar to other well classes, except for Class VI which tends to be much more intensive in both cost and scope. Class VI wells require expansive testing and monitoring infrastructure to be put in place to support carbon capture and sequestration.

What is UIC permitting?

The UIC Program in the Land Protection Division writes permits for, and performs inspections of, injection wells used for the disposal of liquids in underground geologic formations, except for those wells that, by state statute, are regulated by the OCC.

What are injection wells used for?

Rule Summary. The goal of federal regulations is to prevent contamination of "underground sources of drinking water" (USDW) from the placement of fluids underground through injection wells. The underground injection control regulations do this by regulating the construction, operation, and closure of injection wells.

What is a Class V injection well?

Class V wells are used to inject non-hazardous fluids underground. Most Class V wells are used to dispose of wastes into or above underground sources of drinking water. This disposal can pose a threat to ground water quality if not managed properly.

For pdfFiller’s FAQs

What is Drinking Water Treatment Residual Class V Injection Well Permit Application?

The Drinking Water Treatment Residual Class V Injection Well Permit Application is a regulatory document required for the disposal of residuals generated from water treatment processes into underground injection wells classified under Class V, which are used for non-hazardous waste.

Who is required to file Drinking Water Treatment Residual Class V Injection Well Permit Application?

Municipalities, water treatment plants, and private entities that generate drinking water treatment residuals and wish to inject these residuals into Class V wells are required to file this application.

How to fill out Drinking Water Treatment Residual Class V Injection Well Permit Application?

To fill out the application, applicants must provide detailed information including the nature of the residuals, the volume produced, the method of disposal, and any relevant operational information regarding the injection well.

What is the purpose of Drinking Water Treatment Residual Class V Injection Well Permit Application?

The purpose of this application is to ensure that the injection of drinking water treatment residuals is conducted in a manner that protects groundwater resources and public health by complying with environmental regulations.

What information must be reported on Drinking Water Treatment Residual Class V Injection Well Permit Application?

The application must report information including the type and quantity of residuals, the characteristics of the underground formation, operational plans for the injection well, monitoring and reporting protocols, and compliance with environmental standards.