Get the free Control of Hazardous Energy Program (Lockout/Tagout) - purdue

This program aims to ensure effective implementation, operation, and recordkeeping of a University lockout/tagout program in compliance with OSHA standards to prevent injuries from unexpected energization

How to fill out control of hazardous energy

How to fill out Control of Hazardous Energy Program (Lockout/Tagout)

1. Identify all equipment and machines that require lockout/tagout procedures.
2. Conduct a thorough energy audit to identify all sources of hazardous energy associated with machinery.
3. Develop a comprehensive lockout/tagout procedure for each piece of equipment, including steps for safely shutting down, isolating, and locking out energy sources.
4. Provide training for all employees on the lockout/tagout procedures and the importance of following them.
5. Ensure that each employee understands how to properly use locks and tags and the correct methods for re-energizing equipment.
6. Implement a clear communication plan to inform all affected employees of lockout/tagout activities.
7. Establish periodic inspections of lockout/tagout procedures to ensure compliance and effectiveness.
8. Maintain documentation of all lockout/tagout activities for record-keeping and compliance purposes.

Who needs Control of Hazardous Energy Program (Lockout/Tagout)?

1. All employees who operate or maintain machinery and equipment that could release hazardous energy.
2. Safety personnel responsible for training and enforcing safety program compliance.
3. Supervisors and managers who oversee operational safety and employee training.
4. Contract workers or third-party service providers who may work on equipment that requires lockout/tagout procedures.

People Also Ask about

What are the 7 steps to lockout tagout?

How LOTO Works. #1: Notify Employees. #2: Identify Energy Sources. #3: Shut Down Equipment. #4: Deactivate Energy Isolating Devices. #5: Apply Applicable LOTO Devices. #6: Dissipate Stored Energy. #7: Verify Energy Isolation.

What are the 7 types of energy sources lockout?

Hazardous energy is defined: "any electrical, mechanical, hydraulic, pneumatic, chemical, nuclear, thermal, gravitational, or other energy that can harm personnel" (CSA Z460-20 "Control of Hazardous Energy - Lockout and Other Methods").

What is the purpose of a lockout tagout program?

Lockout/tagout establishes the maximum performance requirements for the control of such hazardous energy. Lockout devices must be substantial enough to prevent removal without the use of excessive force or unusual techniques, such as with the use of bolt cutters or other metal cutting tools.

What is a hazardous energy control program OSHA 30?

What is the intent of the energy control program? To ensure that before any employee services equipment where the potential exists for unexpected energization or start-up of equipment or the release of stored energy, the machine or equipment is isolated from the energy source and rendered inoperative.

What is the primary purpose of lockout tagout procedures Quizlet?

What is Lockout Tagout? Lockout tagout is a protection system against unintentional exposure to hazardous energy from equipment and machinery. A lockout device, such as a padlock, secures the energy isolating device while a tagout device (i.e. a tag) warns employees not to use the equipment.

What is the purpose of the lockout system?

Ultimately, the primary purpose of LOTO is to protect workers from hazardous energy sources, including electrical, mechanical, hydraulic, pneumatic, chemical, thermal or other energy sources.

What is the primary purpose of a lockout tagout program?

The purpose of a lockout/tag out program is to control hazardous energy. A lockout program should: Identify the types of: Hazardous energy in the workplace.

For pdfFiller’s FAQs

What is Control of Hazardous Energy Program (Lockout/Tagout)?

The Control of Hazardous Energy Program, commonly known as Lockout/Tagout (LOTO), is a safety procedure used in industrial settings to ensure that machinery is properly shut off and not able to be started up again before maintenance or servicing work is completed. The program involves locking or tagging the energy sources to prevent accidental release of hazardous energy that could cause injury to workers.

Who is required to file Control of Hazardous Energy Program (Lockout/Tagout)?

Employers, particularly those in industries with hazardous machinery or processes, are required to implement and maintain a Control of Hazardous Energy Program (Lockout/Tagout). This includes anyone responsible for the maintenance, servicing, or repair of machines where hazardous energy must be controlled.

How to fill out Control of Hazardous Energy Program (Lockout/Tagout)?

To fill out a Control of Hazardous Energy Program (Lockout/Tagout), one must identify all energy sources associated with the machinery, describe the specific procedures for lockout/tagout, document the responsibilities of involved personnel, list the required tools or devices, and provide training information for workers on how to effectively implement the program.

What is the purpose of Control of Hazardous Energy Program (Lockout/Tagout)?

The purpose of the Control of Hazardous Energy Program (Lockout/Tagout) is to protect workers from the unexpected energization or startup of machines and equipment during maintenance or servicing. It ensures a safer work environment by preventing injury or death from the release of hazardous energy sources.

What information must be reported on Control of Hazardous Energy Program (Lockout/Tagout)?

The information that must be reported on a Control of Hazardous Energy Program (Lockout/Tagout) includes the types of hazardous energy present, the procedures for locking and tagging out equipment, employee training records, audits of the program's effectiveness, and documentation of any incidents or near misses involving hazardous energy.