Get the free Category 1 Periodic Hydraulic Elevator Test - dsps wi

This document outlines the requirements and instructions for conducting a periodic test on hydraulic elevators to ensure compliance with safety standards set by ASME and the state of Wisconsin.

How to fill out category 1 periodic hydraulic

How to fill out Category 1 Periodic Hydraulic Elevator Test

1. Review the elevator maintenance log to ensure the elevator is operational.
2. Prepare necessary tools and equipment for testing.
3. Check the hydraulic fluid levels and inspect hoses for leaks.
4. Test the elevator's emergency communication system.
5. Inspect the door operation and safety devices.
6. Verify the operation of the emergency lowering system.
7. Conduct a load test with the appropriate weight.
8. Document the results of each test in the provided form.
9. Address any issues that arise during testing.
10. Submit the completed test report to the relevant authority.

Who needs Category 1 Periodic Hydraulic Elevator Test?

1. Building owners and property managers responsible for maintaining hydraulic elevators.
2. Elevator maintenance contractors and service personnel.
3. Regulatory agencies that enforce elevator safety standards.

People Also Ask about

Are hydraulic elevators common?

There are three primary elevator types: hydraulic lifts, electric traction lifts, and machine room-less lifts. While each of these types of lifts has its own pros and cons, the hydraulic elevator is the most commonly used in modern society.

What is cat 1 elevator testing?

Category One (CAT1) An annual no load safety test performed between January 1 and December 31. CAT1 inspections must be submitted within 21 days of inspection date to avoid late fees. Filings not submitted by January 21 of the following year will not be accepted and failure to file violations will be issued.

What is cat 5 testing elevator?

A category 5 full-load test is a process intended to make sure that your elevator is performing in the way in which it was originally designed by lifting its rated (maximum) load at its rated (maximum) speed.

What is cat 5 elevator testing?

A category 5 full-load test is a process intended to make sure that your elevator is performing in the way in which it was originally designed by lifting its rated (maximum) load at its rated (maximum) speed.

How often are elevators tested?

Most states require annual elevator inspections. However, local county and city ordinances may require them more regularly. In reality, most elevators need much more frequent inspections. If you have a contract with an elevator maintenance company, it may include visits every three months.

What is a 5 year load test on an elevator?

During the five-year inspection for traction elevators, the inspector will conduct all the inspections for an annual test but will also put the elevator under a 125% capacity load and check the brakes and safeties to ensure they hold the car in place within a half-inch when triggered.

What is a Category 5 elevator inspection in NYC?

Category Five (CAT5) Performed within 5 years from the month of the most recent CAT5 test, or with rated load and speed every 5 years from the month of issuance of a Certificate of Compliance for a new elevator. CAT5 tests must be submitted within 21 days from the test date to avoid late fees.

What is a CAT 5 elevator test?

Category 5 Elevator Inspection In addition to the same tests performed in a Category 1 inspection, the Category 5 test includes: test weights to verify full load. full-speed operation of buffers. car safety devices and tripping speeds.

What is a 5 year load test on an elevator?

During the five-year inspection for traction elevators, the inspector will conduct all the inspections for an annual test but will also put the elevator under a 125% capacity load and check the brakes and safeties to ensure they hold the car in place within a half-inch when triggered.

What is cat 1 testing on elevators?

Category 1 Elevator Inspection The Category 1 test required by the DOB must be scheduled with a licensed inspection agency and a certified category test witness. The inspection itself typically takes 2 hours for each elevator cab and includes: all safety devices (no-load test) cables used for suspension.

For pdfFiller’s FAQs

What is Category 1 Periodic Hydraulic Elevator Test?

The Category 1 Periodic Hydraulic Elevator Test is a safety inspection and functional test conducted on hydraulic elevators, typically performed annually to ensure they operate correctly and comply with code requirements.

Who is required to file Category 1 Periodic Hydraulic Elevator Test?

Building owners or facility managers are required to file the Category 1 Periodic Hydraulic Elevator Test with local regulatory authorities to demonstrate compliance with safety regulations.

How to fill out Category 1 Periodic Hydraulic Elevator Test?

The Category 1 Periodic Hydraulic Elevator Test form should be filled out by a licensed elevator technician, detailing test results, equipment specifications, and any maintenance or repair work required.

What is the purpose of Category 1 Periodic Hydraulic Elevator Test?

The purpose of the Category 1 Periodic Hydraulic Elevator Test is to verify the operational safety of hydraulic elevators, ensuring they function properly and safely for users.

What information must be reported on Category 1 Periodic Hydraulic Elevator Test?

The information reported on the Category 1 Periodic Hydraulic Elevator Test includes the elevator's identification, date of the test, details of the technician performing the test, results of the safety checks, and any observed deficiencies or repairs needed.