ID Backflow Assembly Test Report Form - City of Post Falls 2014-2025 free printable template

City of Post Falls Water Division 2002 West Service Way, Post Falls, ID 83854 tel (208)777-9857 ? Fax (208)262-7348 ? Internet: www.postfallsidaho.org Email: Daniels postfallsidaho.org Customer Name:

How to fill out ID Backflow Assembly Test Report Form

How to fill out ID Backflow Assembly Test Report Form

1. Begin by obtaining the ID Backflow Assembly Test Report Form from your local water authority or online.
2. Fill in the date of the test at the top of the form.
3. Enter the name and address of the property where the backflow assembly is installed.
4. Provide details of the backflow assembly, including the manufacturer, model number, and serial number.
5. Enter the name and contact information of the person conducting the test.
6. Record the test results for each of the two check valves of the assembly, including the initial and final readings.
7. Indicate whether the assembly has passed or failed the test based on the results.
8. Sign and date the form at the bottom to certify the accuracy of the information provided.
9. Submit the completed form to the appropriate local water authority as per their regulations.

Who needs ID Backflow Assembly Test Report Form?

1. The ID Backflow Assembly Test Report Form is needed by property owners, plumbing contractors, and certified backflow testers.
2. It is also required by local water authorities for compliance with backflow prevention testing regulations.

People Also Ask about

Is the water quality in Post Falls Idaho?

For the latest quarter assessed by the U.S. EPA (January 2021 - March 2021), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Is backflow testing required in Idaho?

Idaho State Drinking Water regulations (IDAPA 58.01. 08.552. 6) require that all backflow assemblies are inspected annually. Properties with assemblies that have not been tested, have not been isolated or repaired, or replaced, shall have water service to the failed assembly discontinued.

What is the hardness of the water in Post Falls Idaho?

Hardness is measured in grains per gallon (GPG). The scale goes from 0-10. Anything over 10 is really heavy extreme amounts. All of Coeurd'Alene, Post falls, and Rathdrum is 10 or higher.

Where does Post Falls get its water?

The source of the water provided by the City is from eight (8) wells, all drawing from the Rathdrum Prairie Aquifer. These wells are capable of producing over 21 million gallons per day. Storage capacity is currently at 6.25 million gallons which can be supplied to City customers even if there is no power available.

How do I become a backflow tester in Idaho?

TRAINING Register online by clicking on the classes' Information/Registration button. Register by phone, give us a call at 503-255-1619. Register by fax by printing the Registration Form and fax it to 503 255-1220. Register by mail by printing the Registration Form and mailing it to Backflow Management Inc.

Where does drinking water in Idaho come from?

Where Does Drinking Water Come From? Approximately 95% of the state's drinking water comes from ground water sources. The remaining 5% is supplied through surface water sources.

For pdfFiller’s FAQs

How can I edit ID Backflow Assembly Test Report Form from Google Drive?

By combining pdfFiller with Google Docs, you can generate fillable forms directly in Google Drive. No need to leave Google Drive to make edits or sign documents, including ID Backflow Assembly Test Report Form. Use pdfFiller's features in Google Drive to handle documents on any internet-connected device.

How do I edit ID Backflow Assembly Test Report Form on an iOS device?

Create, edit, and share ID Backflow Assembly Test Report Form from your iOS smartphone with the pdfFiller mobile app. Installing it from the Apple Store takes only a few seconds. You may take advantage of a free trial and select a subscription that meets your needs.

How do I fill out ID Backflow Assembly Test Report Form on an Android device?

Use the pdfFiller Android app to finish your ID Backflow Assembly Test Report Form and other documents on your Android phone. The app has all the features you need to manage your documents, like editing content, eSigning, annotating, sharing files, and more. At any time, as long as there is an internet connection.

What is ID Backflow Assembly Test Report Form?

The ID Backflow Assembly Test Report Form is a document used to report the results of backflow prevention assembly testing, ensuring that these devices are functioning properly to prevent contamination of the potable water supply.

Who is required to file ID Backflow Assembly Test Report Form?

Individuals or businesses that own or operate a backflow prevention assembly must file the ID Backflow Assembly Test Report Form after testing is completed, typically performed by a certified backflow assembly tester.

How to fill out ID Backflow Assembly Test Report Form?

To fill out the ID Backflow Assembly Test Report Form, provide information such as the name and address of the property owner, details of the backflow assembly, test results, tester's certification information, and any required signatures.

What is the purpose of ID Backflow Assembly Test Report Form?

The purpose of the ID Backflow Assembly Test Report Form is to document the testing and functionality of backflow prevention devices to ensure compliance with health and safety regulations, and to prevent contamination of the drinking water supply.

What information must be reported on ID Backflow Assembly Test Report Form?

The form must report information such as the location of the assembly, type of backflow prevention device, test results including the date of testing, tester's details, and any maintenance performed.