MN Backflow Preventor (RPZ) Test Report - City of Minneapolis 2016-2025 free printable template

Development Services Customer Service Center TH 250 South 4 Street Room 300 Minneapolis, MN 55415 1316 Office 6126733000 or 311 Fax 6123701416 TTY 6126732157 www.minneapolismn.gov/mdr BACKFLOW PREVENTER

How to fill out MN Backflow Preventor RPZ Test Report

How to fill out a backflow preventer test report:

1. Begin by gathering all the necessary information such as the address where the backflow preventer is located, the date of the test, and the name of the tester.
2. Inspect the backflow preventer to ensure it is in good working condition and properly installed. Take note of any visible issues or abnormalities.
3. Follow the testing procedure outlined by your local water agency or regulatory body. This typically involves performing various tests and measurements to check the functionality of the backflow preventer.
4. Record the results of each test in the test report form. Include details such as the pressure readings, flow rates, and any other relevant data. Make sure to clearly label each section and provide accurate information.
5. If any problems or issues are identified during the testing process, document them in the report and indicate the necessary actions to be taken to rectify the situation.
6. Cross-check the completed report for any errors or omissions. Ensure that all required fields are filled out accurately and completely.
7. Obtain the necessary signatures. This may include the signature of the tester, the property owner or manager, and sometimes the local authority or water agency representative.
8. Once the test report is completed and signed, submit it to the appropriate authority or agency as per the regulations in your area. Keep a copy for your own records.

Who needs a backflow preventer test report:

1. Property owners or managers: It is the responsibility of property owners or managers to ensure that backflow preventers are regularly tested and maintained. They may need the test report as proof of compliance with local regulations.
2. Plumbing contractors or testers: Professionals who specialize in backflow prevention testing and maintenance are often required to provide a test report to their clients. This report serves as a record of their services and the condition of the backflow preventer.
3. Local water agencies or regulatory bodies: These authorities oversee the implementation and enforcement of backflow prevention regulations. They may require property owners or plumbing contractors to submit test reports to ensure compliance and maintain the safety of the water supply.

In conclusion, filling out a backflow preventer test report requires careful attention to detail and adherence to local regulations. It is important for property owners, plumbing contractors, and regulatory bodies to have access to these reports in order to maintain the integrity of the water supply and ensure the proper functioning of backflow preventers.

People Also Ask about

Where should backflow preventer be installed?

RP's must be installed above ground. Backflow preventers installed inside must be a minimum distance of twelve (12) inches above the floor, and no higher than four (4) foot above the floor, with adequate clearance around the backflow preventer for testing and/or repair.

Do I really need a backflow preventer?

Why is a Backflow Preventer Required on Lawn Sprinkler Systems? Lawn irrigation systems can backflow contaminated water into your drinking water. In order to prevent this, building codes require that these systems be protected with a backflow preventer: International Plumbing Code 2006 608.16.

What does RPZ stand for?

Reduced pressure zone assemblies, also known as RPZ valves, are extremely important. They're used to keep contamination or pollution out of your water. Specifically, these devices are installed onto your plumbing system to help protect both drinking water and the city water supply.

Can I use a check valve instead of a backflow preventer?

check valves. And we clear up a misconception that's often inquired about in online forums: while check valves have other important applications, they cannot be considered a safe substitute for backflow preventers when it comes to protecting the purity of drinking water.

Is a backflow preventer required in Minnesota?

Per State of Minnesota Statute 4714, an approved backflow preventer assembly/device is required to be installed on an equipment connecting to potable water in order to protect our potable water supplies from contamination in an event of reduced water pressure which may allow contaminated water to backflow into our

When did backflow valves become mandatory?

However, it wasn't until 1974, when Congress established the Safe Drinking Water Act (SDWA), that unprotected cross-connections were required to be eliminated or protected in order to safeguard human health from contaminants in drinking water.

What does an RPZ valve do?

A reduced pressure zone device (RPZD, RPZ, or RPZ valve) is a type of backflow prevention device used to protect water supplies from contamination.

For pdfFiller’s FAQs

How can I manage my MN Backflow Preventor RPZ Test Report directly from Gmail?

You may use pdfFiller's Gmail add-on to change, fill out, and eSign your MN Backflow Preventor RPZ Test Report as well as other documents directly in your inbox by using the pdfFiller add-on for Gmail. pdfFiller for Gmail may be found on the Google Workspace Marketplace. Use the time you would have spent dealing with your papers and eSignatures for more vital tasks instead.

How can I edit MN Backflow Preventor RPZ Test Report from Google Drive?

People who need to keep track of documents and fill out forms quickly can connect PDF Filler to their Google Docs account. This means that they can make, edit, and sign documents right from their Google Drive. Make your MN Backflow Preventor RPZ Test Report into a fillable form that you can manage and sign from any internet-connected device with this add-on.

How do I edit MN Backflow Preventor RPZ Test Report on an Android device?

With the pdfFiller mobile app for Android, you may make modifications to PDF files such as MN Backflow Preventor RPZ Test Report. Documents may be edited, signed, and sent directly from your mobile device. Install the app and you'll be able to manage your documents from anywhere.

What is backflow preventer test report?

The backflow preventer test report is a document that certifies that a backflow preventer device has been tested and is functioning properly.

Who is required to file backflow preventer test report?

Property owners or operators who have backflow preventer devices installed are required to file the test report.

How to fill out backflow preventer test report?

The test report must be completed by a certified backflow preventer tester and submitted to the appropriate regulatory agency.

What is the purpose of backflow preventer test report?

The purpose of the test report is to ensure that backflow preventer devices are properly maintained and functioning to protect the potable water supply.

What information must be reported on backflow preventer test report?

The test report must include the date of the test, the results of the test, the make and model of the backflow preventer device, and the signature of the certified tester.